Drive shaft - BA33.30-P-1000-07A
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 168.006/007/008/009/031/032/033/035/109/131/132/133/135, 414.700
DRIVE SHAFT
| Number | Designation | MODEL 168.006/007/008/009/031/032/033/035/109/131/132/133/135 | MODEL 414.700 | ||
|---|---|---|---|---|---|
| BA33.30-P-1001-07A | Collar nut, input shaft to front axle shaft flange | Stage 1 | Nm | 180 | 180 |
| Loosen stage 2 | Nm | -180 | -180 | ||
| Stage 3 | Nm | 80 | 80 | ||
| Stage 4 | ∠° | 45 | 45 | ||
| BA33.30-P-1002-07A | Bolt, right front axle shaft intermediate bearing to crankcase | Nm | 20 | 20 | |