Engine mount, engine support (vehicle side) - BA22.10-P-1000-03K
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 217, 222
TIMING CHAIN DRIVE
| Number | Designation | MODEL 217 with ENGINE 157, 278, 279 | MODEL 217 with ENGINE 276 | |||
|---|---|---|---|---|---|---|
| BA22.10-P-1001-03K | Bolt, front engine mount to engine support | M10 | Stage 1 | Nm | 45 | 50 |
| Stage 2 | ∠° | 120 | - | |||
| M12 | Stage 1 | Nm | 45 | 45 | ||
| Stage 2 | ∠° | 120 | 120 | |||
| BA22.10-P-1002-03K | Bolt, front engine mount to front axle carrier | Nm | 30 | 30 | ||
| BA22.10-P-1003-03K | Bolt, rear engine mount to bracket/transmission | M8 | Nm | 30 | 30 | |
| M10 | Nm | 50 | 50 | |||
| BA22.10-P-1004-03K | Rear engine mount on engine support | Nm | 30 | 30 | ||
| BA22.10-P-1005-03K | Bolt, rear engine support to frame floor assembly | Stage 1 | Nm | 80 | 80 | |
| Loosen stage | 2 ° | - | - | |||
| Stage 3 | Nm | - | - | |||
| BA22.10-P-1006-03K | Bolt, bracket to transmission | Stage 1 | Nm | 10 | 10 | |
| Stage 2 | ∠° | 90 | 90 | |||
ENGINE MOUNT, ENGINE SUPPORT (ENGINE SIDE)
| Number | Designation | MODEL 222 with ENGINE 276, 642, 651 | MODEL 222 with ENGINE 157, 279TMODEL 222 with ENGINE 277, 278 except CODE Z07 | |||
|---|---|---|---|---|---|---|
| BA22.10-P-1001-03K | Bolt, front engine mount to engine support | M10 | Stage 1 | Nm | 50 | 45 |
| Stage 2 | ∠° | - | 120 | |||
| M12 | Stage 1 | Nm | - | 45 | ||
| Stage 2 | ∠° | - | 120 | |||
| BA22.10-P-1002-03K | Bolt, front engine mount to front axle carrier | Nm | 30 | 30 | ||
| BA22.10-P-1003-03K | Bolt, rear engine mount to bracket/transmission | M8 | Nm | 30 | 30 | |
| M10 | Nm | 50 | 50 | |||
| BA22.10-P-1004-03K | Rear engine mount on engine support | Nm | 30 | 30 | ||
| BA22.10-P-1005-03K | Bolt, rear engine support to frame floor assembly | Stage 1 | Nm | 80 | 80 | |
| Loosen stage 2 | ° | - | - | |||
| Stage 3 | Nm | - | - | |||
| BA22.10-P-1006-03K | Bolt, bracket to transmission | Stage 1 | Nm | 10 | 10 | |
| Stage 2 | ∠° | 90 | 90 | |||
TIMING CHAIN, CHAIN TENSIONER
| Number | Designation | MODEL 222 with ENGINE 277, 278 with CODE Z07 | |||
|---|---|---|---|---|---|
| BA22.10-P-1001-03K | Bolt, front engine mount to engine support | M10 | Stage 1 | Nm | 45 |
| Stage 2 | ∠° | 120 | |||
| M12 | Stage 1 | Nm | 45 | ||
| Stage 2 | ∠° | 125 | |||
| BA22.10-P-1002-03K | Bolt, front engine mount to front axle carrier | Nm | 30 | ||
| BA22.10-P-1003-03K | Bolt, rear engine mount to bracket/transmission | M8 | Nm | 30 | |
| M10 | Nm | 50 | |||
| BA22.10-P-1004-03K | Rear engine mount on engine support | Nm | 30 | ||
| BA22.10-P-1005-03K | Bolt, rear engine support to frame floor assembly | Stage 1 | Nm | 80 | |
| Loosen stage 2 | ° | 360 | |||
| Stage 3 | Nm | 120 | |||
| BA22.10-P-1006-03K | Bolt, bracket to transmission | Stage 1 | Nm | 10 | |
| Stage 2 | ∠° | 90 | |||