Oil cooling - BA18.30-P-1000-01B
WARNING: This page does not describe the selected car, but rather 199 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 112, 113, 137, 155, 156, 159, 275, 285
| Number | Designation | ENGINE 112 | ENGINE 113 | |
|---|---|---|---|---|
| BA18.30-P-1001-01B | Oil-water heat exchanger to oil filter housing | Nm | 11 | 9 |
| BA18.30-P-1002-01B | Oil cooler heat exchanger to cylinder crankcase | Nm | - | - |
| BA18.30-P-1003-01B | Union nut, oil line to oil cooler | Nm | - | 30 |
| BA18.30-P-1004-01B | Oil line to cylinder crankcase | Nm | - | - |
| BA18.30-P-1005-01B | Screw/bolt, fan to engine oil cooler | Nm | - | 4 |
| BA18.30-P-1006-01B | Screw/bolt, bracket to retaining frame | Nm | - | 9 |
| BA18.30-P-1007-01B | Nut connecting bracket to retaining frame | Nm | - | 9 |
| BA18.30-P-1008-01B | Screw/bolt, engine radiator retaining bracket to front end assembly | Nm | - | 10 |
| BA18.30-P-1009-01B | Nut, engine radiator retaining bracket to front end assembly | Nm | - | - |
| BA18.30-P-1010-01B | Screw/bolt, oil line to bracket | Nm | - | - |
| BA18.30-P-1011-01B | Oil line to additional oil cooler | Nm | - | 8 |
| BA18.30-P-1012-01B | Nut, bracket to low temperature radiator | Nm | - | 6 |
| BA18.30-P-1013-01B | Oil line fitting to oil cooler | Nm | - | - |
| BA18.30-P-1014-01B | Retaining clamp, cylinder crankcase engine oil line retaining clamp to engine oil cooler | Nm | - | - |
| BA18.30-P-1015-01B | Screw/bolt, engine radiator retaining bracket to radiator support | Nm | - | - |
| BA18.30-P-1016-01B | Screw/bolt, oil line flange to oil cooler | Nm | - | - |
| BA18.30-P-1017-01B | Drain plug to oil cooler | Nm | - | - |
| BA18.30-P-1018-01B | Nut, strut to additional radiator bracket | Nm | - | - |
| BA18.30-P-1019-01B | Nut, strut to oil return line | Nm | - | - |
| BA18.30-P-1020-01B | Nut, strut to radiator support | Nm | - | - |
| BA18.30-P-1021-01B | Oil level sensor to oil tank | Nm | - | - |
| BA18.30-P-1022-01B | Nut, vent line to oil tank | Nm | - | - |
| BA18.30-P-1023-01B | Screw/bolt, oil tank to crossmember | Nm | - | - |
| BA18.30-P-1024-01B | Screw/bolt, oil tank holder to frame-type integral support | Nm | - | - |
| BA18.30-P-1025-01B | Oil drain screw to oil tank | Nm | - | - |
| BA18.30-P-1026-01B | Screw/bolt, oil line feed line mount to oil cooler/air ducting | Nm | - | - |
| BA18.30-P-1027-01B | Bolt/nut, oil line feed line mount to connecting point/heat exchanger | Nm | - | - |
| BA18.30-P-1028-01B | Screw/bolt, oil line return line mount to engine/wheel arch cooler/frame-type integral support | Nm | - | - |
| BA18.30-P-1029-01B | Screw/bolt, oil line mount to transmission | Nm | - | - |
| BA18.30-P-1030-01B | Screw/bolt, oil feed line connecting point to oil reservoir | Nm | - | - |
| BA18.30-P-1031-01B | Nut, oil line feed line/return mount to oil cooler/rear floor/body | Nm | - | - |
| Number | Designation | ENGINE 137 | ENGINE 155 | |
|---|---|---|---|---|
| BA18.30-P-1001-01B | Oil-water heat exchanger to oil filter housing | Nm | - | - |
| BA18.30-P-1002-01B | Oil cooler heat exchanger to cylinder crankcase | Nm | 8 | - |
| BA18.30-P-1003-01B | Union nut, oil line to oil cooler | Nm | - | 58 |
| BA18.30-P-1004-01B | Oil line to cylinder crankcase | Nm | - | - |
| BA18.30-P-1005-01B | Screw/bolt, fan to engine oil cooler | Nm | - | - |
| BA18.30-P-1006-01B | Screw/bolt, bracket to retaining frame | Nm | - | - |
| BA18.30-P-1007-01B | Nut connecting bracket to retaining frame | Nm | - | - |
| BA18.30-P-1008-01B | Screw/bolt, engine radiator retaining bracket to front end assembly | Nm | - | - |
| BA18.30-P-1009-01B | Nut, engine radiator retaining bracket to front end assembly | Nm | - | - |
| BA18.30-P-1010-01B | Screw/bolt, oil line to bracket | Nm | - | - |
| BA18.30-P-1011-01B | Oil line to additional oil cooler | Nm | - | - |
| BA18.30-P-1012-01B | Nut, bracket to low temperature radiator | Nm | - | - |
| BA18.30-P-1013-01B | Oil line fitting to oil cooler | Nm | - | 60 |
| BA18.30-P-1014-01B | Retaining clamp, cylinder crankcase engine oil line retaining clamp to engine oil cooler | Nm | - | - |
| BA18.30-P-1015-01B | Screw/bolt, engine radiator retaining bracket to radiator support | Nm | - | - |
| BA18.30-P-1016-01B | Screw/bolt, oil line flange to oil cooler | Nm | - | - |
| BA18.30-P-1017-01B | Drain plug to oil cooler | Nm | - | - |
| BA18.30-P-1018-01B | Nut, strut to additional radiator bracket | Nm | - | - |
| BA18.30-P-1019-01B | Nut, strut to oil return line | Nm | - | - |
| BA18.30-P-1020-01B | Nut, strut to radiator support | Nm | - | - |
| BA18.30-P-1021-01B | Oil level sensor to oil tank | Nm | - | - |
| BA18.30-P-1022-01B | Nut, vent line to oil tank | Nm | - | - |
| BA18.30-P-1023-01B | Screw/bolt, oil tank to crossmember | Nm | - | - |
| BA18.30-P-1024-01B | Screw/bolt, oil tank holder to frame-type integral support | Nm | - | - |
| BA18.30-P-1025-01B | Oil drain screw to oil tank | Nm | - | - |
| BA18.30-P-1026-01B | Screw/bolt, oil line feed line mount to oil cooler/air ducting | Nm | - | - |
| BA18.30-P-1027-01B | Bolt/nut, oil line feed line mount to connecting point/heat exchanger | Nm | - | - |
| BA18.30-P-1028-01B | Screw/bolt, oil line return line mount to engine/wheel arch cooler/frame-type integral support | Nm | - | - |
| BA18.30-P-1029-01B | Screw/bolt, oil line mount to transmission | Nm | - | - |
| BA18.30-P-1030-01B | Screw/bolt, oil feed line connecting point to oil reservoir | Nm | - | - |
| BA18.30-P-1031-01B | Nut, oil line feed line/return mount to oil cooler/rear floor/body | Nm | - | - |
| Number | Designation | ENGINE 156 | ENGINE 159 | |
|---|---|---|---|---|
| BA18.30-P-1001-01B | Oil-water heat exchanger to oil filter housing | Nm | - | - |
| BA18.30-P-1002-01B | Oil cooler heat exchanger to cylinder crankcase | Nm | - | - |
| BA18.30-P-1003-01B | Union nut, oil line to oil cooler | Nm | - | - |
| BA18.30-P-1004-01B | Oil line to cylinder crankcase | Nm | - | 20 |
| BA18.30-P-1005-01B | Screw/bolt, fan to engine oil cooler | Nm | - | - |
| BA18.30-P-1006-01B | Screw/bolt, bracket to retaining frame | Nm | 9 | - |
| BA18.30-P-1007-01B | Nut connecting bracket to retaining frame | Nm | 9 | - |
| BA18.30-P-1008-01B | Screw/bolt, engine radiator retaining bracket to front end assembly | Nm | - | - |
| BA18.30-P-1009-01B | Nut, engine radiator retaining bracket to front end assembly | Nm | - | - |
| BA18.30-P-1010-01B | Screw/bolt, oil line to bracket | Nm | - | - |
| BA18.30-P-1011-01B | Oil line to additional oil cooler | Nm | - | - |
| BA18.30-P-1012-01B | Nut, bracket to low temperature radiator | Nm | - | - |
| BA18.30-P-1013-01B | Oil line fitting to oil cooler | Nm | 9 | - |
| BA18.30-P-1014-01B | Retaining clamp, cylinder crankcase engine oil line retaining clamp to engine oil cooler | Nm | - | - |
| BA18.30-P-1015-01B | Screw/bolt, engine radiator retaining bracket to radiator support | Nm | - | - |
| BA18.30-P-1016-01B | Screw/bolt, oil line flange to oil cooler | Nm | 9 | - |
| BA18.30-P-1017-01B | Drain plug to oil cooler | Nm | 15 | - |
| BA18.30-P-1018-01B | Nut, strut to additional radiator bracket | Nm | 23 | - |
| BA18.30-P-1019-01B | Nut, strut to oil return line | Nm | 23 | - |
| BA18.30-P-1020-01B | Nut, strut to radiator support | Nm | 23 | - |
| BA18.30-P-1021-01B | Oil level sensor to oil tank | Nm | - | 9 |
| BA18.30-P-1022-01B | Nut, vent line to oil tank | Nm | - | 9 |
| BA18.30-P-1023-01B | Screw/bolt, oil tank to crossmember | Nm | - | 9 |
| BA18.30-P-1024-01B | Screw/bolt, oil tank holder to frame-type integral support | Nm | - | 20 |
| BA18.30-P-1025-01B | Oil drain screw to oil tank | Nm | - | 30 |
| BA18.30-P-1026-01B | Screw/bolt, oil line feed line mount to oil cooler/air ducting | Nm | - | 7 |
| BA18.30-P-1027-01B | Bolt/nut, oil line feed line mount to connecting point/heat exchanger | Nm | - | 8 |
| BA18.30-P-1028-01B | Screw/bolt, oil line return line mount to engine/wheel arch cooler/frame-type integral support | Nm | - | 8 |
| BA18.30-P-1029-01B | Screw/bolt, oil line mount to transmission | Nm | - | 21 |
| BA18.30-P-1030-01B | Screw/bolt, oil feed line connecting point to oil reservoir | Nm | - | 9 |
| BA18.30-P-1031-01B | Nut, oil line feed line/return mount to oil cooler/rear floor/body | Nm | - | 9 |
| Number | Designation | ENGINE 275.950/951/953/954, 285 | ENGINE 275.980/981/982/983 | |
|---|---|---|---|---|
| BA18.30-P-1001-01B | Oil-water heat exchanger to oil filter housing | Nm | - | - |
| BA18.30-P-1002-01B | Oil cooler heat exchanger to cylinder crankcase | Nm | - | - |
| BA18.30-P-1003-01B | Union nut, oil line to oil cooler | Nm | 30 | 30 |
| BA18.30-P-1004-01B | Oil line to cylinder crankcase | Nm | 8 | 8 |
| BA18.30-P-1005-01B | Screw/bolt, fan to engine oil cooler | Nm | - | 4 |
| BA18.30-P-1006-01B | Screw/bolt, bracket to retaining frame | Nm | - | 10 |
| BA18.30-P-1007-01B | Nut connecting bracket to retaining frame | Nm | - | 10 |
| BA18.30-P-1008-01B | Screw/bolt, engine radiator retaining bracket to front end assembly | Nm | 8 | 27 |
| BA18.30-P-1009-01B | Nut, engine radiator retaining bracket to front end assembly | Nm | - | 10 |
| BA18.30-P-1010-01B | Screw/bolt, oil line to bracket | Nm | 8 | - |
| BA18.30-P-1011-01B | Oil line to additional oil cooler | Nm | - | - |
| BA18.30-P-1012-01B | Nut, bracket to low temperature radiator | Nm | - | - |
| BA18.30-P-1013-01B | Oil line fitting to oil cooler | Nm | - | - |
| BA18.30-P-1014-01B | Retaining clamp, cylinder crankcase engine oil line retaining clamp to engine oil cooler | Nm | 8 | 8 |
| BA18.30-P-1015-01B | Screw/bolt, engine radiator retaining bracket to radiator support | Nm | 8 | 8 |
| BA18.30-P-1016-01B | Screw/bolt, oil line flange to oil cooler | Nm | 9 | 9 |
| BA18.30-P-1017-01B | Drain plug to oil cooler | Nm | - | - |
| BA18.30-P-1018-01B | Nut, strut to additional radiator bracket | Nm | - | 23 |
| BA18.30-P-1019-01B | Nut, strut to oil return line | Nm | - | 23 |
| BA18.30-P-1020-01B | Nut, strut to radiator support | Nm | - | 23 |
| BA18.30-P-1021-01B | Oil level sensor to oil tank | Nm | - | - |
| BA18.30-P-1022-01B | Nut, vent line to oil tank | Nm | - | - |
| BA18.30-P-1023-01B | Screw/bolt, oil tank to crossmember | Nm | - | - |
| BA18.30-P-1024-01B | Screw/bolt, oil tank holder to frame-type integral support | Nm | - | - |
| BA18.30-P-1025-01B | Oil drain screw to oil tank | Nm | - | - |
| BA18.30-P-1026-01B | Screw/bolt, oil line feed line mount to oil cooler/air ducting | Nm | - | - |
| BA18.30-P-1027-01B | Bolt/nut, oil line feed line mount to connecting point/heat exchanger | Nm | - | - |
| BA18.30-P-1028-01B | Screw/bolt, oil line return line mount to engine/wheel arch cooler/frame-type integral support | Nm | - | - |
| BA18.30-P-1029-01B | Screw/bolt, oil line mount to transmission | Nm | - | - |
| BA18.30-P-1030-01B | Screw/bolt, oil feed line connecting point to oil reservoir | Nm | - | - |
| BA18.30-P-1031-01B | Nut, oil line feed line/return mount to oil cooler/rear floor/body | Nm | - | - |