Belt tensioning device - BA13.25-P-1000-01A
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 601, 603, 604, 605, 606
ENGINE 602.912/93/94/962
| Number | Designation | ENGINE 601, 602 (except 602.98), 603 (except 603.971) | ENGINE 603.971 | |
|---|---|---|---|---|
| BA13.25-P-1001-01A | Mounting screw for tensioner pulley | Nm | 25 | 30 |
| BA13.25-P-1002-01A | Bearing pin for clamping lever bearing | Nm | 100 | 100 |
| BA13.25-P-1003-01A | Clamping device damper on cylinder head | Nm | 25 | 25 |
| BA13.25-P-1004-01A | Clamping device damper on clamping lever | Nm | 20 | 20 |
| BA13.25-P-1005-01A | Mounting bolt of settling roller | Nm | - | 30 |
| BA13.25-P-1006-01A | Clamping lever bolt on bearing pin | Nm | 10 | - |
| BA13.25-P-1007-01A | Spring clamp lever on cylinder head | Nm | 21 | 21 |
| Number | Designation | ENGINE 604, 605, 606 | |
|---|---|---|---|
| BA13.25-P-1001-01A | Mounting screw for tensioner pulley | Nm | 30 |
| BA13.25-P-1002-01A | Bearing pin for clamping lever bearing | Nm | 100 |
| BA13.25-P-1003-01A | Clamping device damper on cylinder head | Nm | 25 |
| BA13.25-P-1004-01A | Clamping device damper on clamping lever | Nm | 20 |
| BA13.25-P-1005-01A | Mounting bolt of settling roller | Nm | - |
| BA13.25-P-1006-01A | Clamping lever bolt on bearing pin | Nm | - |
| BA13.25-P-1007-01A | Spring clamp lever on cylinder head | Nm | - |