Bolt tightening diagram for cylinder head cover - AR01.20-P-5014-03VA
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 272
CYLINDER HEAD
| Number | Designation | Engine 272 | |||
|---|---|---|---|---|---|
| BA01.30-P-1004-01O | Bolt of cylinder head cover on cylinder head | M7 | 1st stage | Nm | 12 |
| 2nd stage | ∠° | 90 | |||
Right cylinder head cover
Tighten cylinder head cover bolts in the numerical sequence.
- Tighten bolts (1-18) in the 1st stage.
- Tighten bolts (1-18) in the 2nd stage.
Left cylinder head cover
Tighten cylinder head cover bolts in the numerical sequence.
- Tighten bolts (1-18) in the 1st stage.
- Tighten bolts (1-18) in the 2nd stage.