Injection pump, unit pump, high pressure pump - BA07.02-P-1000-01A
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 601.912/913, 602.982/983, 603.971, 604, 605, 606
INJECTION PUMP, UNIT PUMP, HIGH PRESSURE PUMP
| Number | Designation | ENGINE 601.912/913, 605.911, 606.910 | ENGINE 602.982/983 | ||
|---|---|---|---|---|---|
| BA07.02-P-1001-01A | Injection pump flange | Nm | 20 | - | |
| BA07.02-P-1002-01A | Central mounting bolt for injection pump | Nm | 50 | - | |
| BA07.02-P-1003-01A | Bolt, inject pump holder at the rear to engine block | Nm | - | 25 | |
| BA07.02-P-1004-01A | Bolt, front injection pump | M8 | Nm | - | 25 |
| BA07.02-P-1005-01A | Screw plug on governor body | Nm | 30 | - | |
| BA07.02-P-1006-01A | Screw plug to distributor fuel injection pump | Nm | - | - | |
| BA07.02-P-1007-01A | Nut, injection pump on intermediate flange | Nm | - | 25 | |
| BA07.02-P-1008-01A | Bolt to sprocket (left-hand thread) | Stage 1 | Nm | - | 70 |
| Stage 2 | ∠° | - | 90 | ||
| BA07.02-P-1009-01A | Distributor pump for drive pinion mount | M14X1.5 | Nm | - | 83 |
| BA07.02-P-1010-01A | Bolt, mounting for intermediate flange to engine block | Nm | - | 20 | |
| BA07.02-P-1011-01A | Mounting nut, drive shaft to sprocket (left-hand thread) | Nm | - | - | |
| BA07.02-P-1012-01A | Delivery-valve holder to M/RSF injection pump | Stage 1 | Nm | 30 | 30 |
| Stage 2 (loosen) | Nm | -30 | -30 | ||
| Stage 3 | Nm | 30 | 30 | ||
| Stage 4 (loosen) | Nm | -30 | -30 | ||
| Stage 5 | Nm | 32 | 32 | ||
INJECTION PUMP, UNIT PUMP, HIGH PRESSURE PUMP
| Number | Designation | ENGINE 603.971 | ENGINE 604 | ||
|---|---|---|---|---|---|
| BA07.02-P-1001-01A | Injection pump flange | Nm | 20 | 20 | |
| BA07.02-P-1002-01A | Central mounting bolt for injection pump | Nm | 45 | 45 | |
| BA07.02-P-1003-01A | Bolt, inject pump holder at the rear to engine block | Nm | 25 | - | |
| BA07.02-P-1004-01A | Bolt, front injection pump | M8 | Nm | 25 | 25 |
| BA07.02-P-1005-01A | Screw plug on governor body | Nm | 30 | - | |
| BA07.02-P-1006-01A | Screw plug to distributor fuel injection pump | Nm | - | 25 | |
| BA07.02-P-1007-01A | Nut, injection pump on intermediate flange | Nm | - | - | |
| BA07.02-P-1008-01A | Bolt to sprocket (left-hand thread) | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA07.02-P-1009-01A | Distributor pump for drive pinion mount M14X1.5 | Nm | - | - | |
| BA07.02-P-1010-01A | Bolt, mounting for intermediate flange to engine block | Nm | - | - | |
| BA07.02-P-1011-01A | Mounting nut, drive shaft to sprocket (left-hand thread) | Nm | - | 45 | |
| BA07.02-P-1012-01A | Delivery-valve holder to M/RSF injection pump | Stage 1 | Nm | 30 | - |
| Stage 2 (loosen) | Nm | -30 | - | ||
| Stage 3 | Nm | 30 | - | ||
| Stage 4 (loosen) | Nm | -30 | - | ||
| Stage 5 | Nm | 32 | - | ||
INJECTION PUMP, UNIT PUMP, HIGH PRESSURE PUMP
| Number | Designation | ENGINE 605.910/912/960/962 | ENGINE 606.912/961/962/964 | ||
|---|---|---|---|---|---|
| BA07.02-P-1001-01A | Injection pump flange | Nm | 20 | 20 | |
| BA07.02-P-1002-01A | Central mounting bolt for injection pump | Nm | 45 | 45 | |
| BA07.02-P-1003-01A | Bolt, inject pump holder at the rear to engine block | Nm | 25 | 25 | |
| BA07.02-P-1004-01A | Bolt, front injection pump | M8 | Nm | 25 | 25 |
| BA07.02-P-1005-01A | Screw plug on governor body | Nm | 30 | 30 | |
| BA07.02-P-1006-01A | Screw plug to distributor fuel injection pump | Nm | - | - | |
| BA07.02-P-1007-01A | Nut, injection pump on intermediate flange | Nm | - | - | |
| BA07.02-P-1008-01A | Bolt to sprocket (left-hand thread) | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA07.02-P-1009-01A | Distributor pump for drive pinion mount M14X1.5 | Nm | - | - | |
| BA07.02-P-1010-01A | Bolt, mounting for intermediate flange to engine block | Nm | - | - | |
| BA07.02-P-1011-01A | Mounting nut, drive shaft to sprocket (left-hand thread) | Nm | - | - | |
| BA07.02-P-1012-01A | Delivery-valve holder to M/RSF injection pump | Stage 1 | Nm | - | - |
| Stage 2 (loosen) | Nm | - | - | ||
| Stage 3 | Nm | - | - | ||
| Stage 4 (loosen) | Nm | - | - | ||
| Stage 5 | Nm | - | - | ||