LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2015 >> GL350 >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Mixture Formation - Torque Specifications) >> Torque Specifications >> Injection nozzles, injection valves, lines >> Injection nozzles, injection valves, lines - BA07.03-P-1000-01F

Injection nozzles, injection valves, lines - BA07.03-P-1000-01F

WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.

ENGINE 133.980, 270, 274 

MODIFICATION NOTES

12.12.13 Value changed: Union nut, fuel line to fuel distributor ENGINE 133.980  
12.12.13 Value changed: Union nut, fuel line to high-pressure pump ENGINE 133.980  
INJECTION NOZZLES, INJECTION VALVES, LINES

Number Designation ENGINE 133.980 ENGINE 270
BA07.03-P-1001-01F Union nut, fuel line to fuel distributor Stage 1 Nm 15 15
Stage 2 ∠° 90 75
Stage 3 ∠° - 25
BA07.03-P-1002-01F Union nut, fuel line to high-pressure pump Stage 1 Nm 15 15
Stage 2 ∠° 90 75
Stage 3 ∠° - 25
BA07.03-P-1003-01F Dust cap on service valve Plastic Nm - -
Metal Nm - -
INJECTION NOZZLES, INJECTION VALVES, LINES

Number Designation ENGINE 274
BA07.03-P-1001-01F Union nut, fuel line to fuel distributor Stage 1 Nm 15
Stage 2 ∠° 75
Stage 3 ∠° 25
BA07.03-P-1002-01F Union nut, fuel line to high-pressure pump Stage 1 Nm 15
Stage 2 ∠° 75
Stage 3 ∠° 25
BA07.03-P-1003-01F Dust cap on service valve Plastic Nm 2
Metal Nm 15