Common rail diesel injection (CDI) - BA07.16-P-1000-01J
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 626
MODIFICATION NOTES
| 24.2.15 | Value changed: Bolt, clamping claw to fuel injector |
COMMON RAIL DIRECT INJECTION (CDI)
| Number | Designation | ENGINE 626 | |
|---|---|---|---|
| BA07.16-P-1001-01J | Union nut, pressure line to fuel system high pressure pump | Nm | 27 |
| BA07.16-P-1002-01J | Union nut, pressure line to rail | Nm | 24 |
| BA07.16-P-1003-01J | Bolt, rail to cylinder head | Nm | 25 |
| BA07.16-P-1004-01J | Bolt, clamping claw to fuel injector | Nm | 35 |
| BA07.16-P-1005-01J | Union nut, pressure line to fuel injector | Nm | 27 |
| BA07.16-P-1006-01J | Nut, spur gear to fuel system high pressure pump | Nm | 90 |
| BA07.16-P-1007-01J | Spacer pin bolt, heat shield to cylinder head | Nm | 10 |
| BA07.16-P-1008-01J | Bolt, heat shield to spacer pin bolt | Nm | 14 |
| BA07.16-P-1009-01J | Bolt, heat shield to heat shield | Nm | 14 |
| BA07.16-P-1010-01J | Bolt, high pressure fuel pump to cylinder head | Nm | 20 |