Common rail diesel injection (CDI) - BA07.16-P-1000-01D
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 646.8/951/961/962/963/966, 647.961, 648
COMMON RAIL DIESEL INJECTION (CDI)
| Number | Designation | ENGINE 646.951/961, 647.961, 648 | ENGINE 646.8 | ||
|---|---|---|---|---|---|
| BA07.16-P-1001-01D | Bolt, shutoff valve to cylinder head | Nm | 8 | - | |
| BA07.16-P-1002-01D | Nut, pressure line to high-pressure pump/rail | Stage 1 | Nm | 23 | 7 |
| Stage 2 | Nm | - | 33 | ||
| BA07.16-P-1003-01D | Banjo bolt, leak oil line to rail | Nm | 30 | 20 | |
| BA07.16-P-1004-01D | Bolt, clamping claw to injector | Stage 1 | Nm | 7 | 7 |
| Stage 2 | ∠° | 90 | 90 | ||
| Stage 3 | ∠° | 90 | 90 | ||
| BA07.16-P-1005-01D | Bolt, bracket to high pressure pump | Nm | 9 | - | |
| BA07.16-P-1006-01D | Bolt, high-pressure pump to cylinder head | Nm | 14 | 14 | |
| BA07.16-P-1007-01D | Nut, pressure line to rail/injector | Stage 1 | Nm | 23 | 7 |
| Stage 2 | Nm | - | 33 | ||
| BA07.16-P-1008-01D | Shield to thermostat, water pump and cylinder head cover | M6 | Nm | 14 | 14 |
| BA07.16-P-1009-01D | Bolt, rail to cylinder head | Nm | 14 | 14 | |
| BA07.16-P-1010-01D | Bolt, rail to bracket | Nm | - | 14 | |
| BA07.16-P-1011-01D | Bolt, bracket to lifting eye | Nm | - | - | |
| BA07.16-P-1012-01D | Pressure regulator valve on rail | Stage 1 | Nm | 60 | - |
| Stage 2 (loosen) | ∠° | -90 | - | ||
| Stage 3 | Nm | 80 | - | ||
| BA07.16-P-1013-01D | Rail pressure sensor to rail | Nm | 20 | - | |
| BA07.16-P-1014-01D | Bolt, quantity control valve to high-pressure pump housing flange | Nm | 7 | 7 | |
| BA07.16-P-1015-01D | High-pressure fitting to high-pressure pump | Nm | 55 | 50 | |
| BA07.16-P-1017-01D | Fuel line on charge air manifold/support brace | Nm | - | 9 | |
| BA07.16-P-1018-01D | Rail bolt on rear lifting eye | Nm | - | 14 | |
| BA07.16-P-1019-01D | Pressure line to front lifting eye | Nm | - | 9 | |
COMMON RAIL DIESEL INJECTION (CDI)
| Number | Designation | ENGINE 646.962/963/966 | ||
|---|---|---|---|---|
| BA07.16-P-1001-01D | Bolt, shutoff valve to cylinder head | Nm | - | |
| BA07.16-P-1002-01D | Nut, pressure line to high-pressure pump/rail | Stage 1 | Nm | 23 |
| Stage 2 | Nm | - | ||
| BA07.16-P-1003-01D | Banjo bolt, leak oil line to rail | Nm | 30 | |
| BA07.16-P-1004-01D | Bolt, clamping claw to injector | Stage 1 | Nm | 7 |
| Stage 2 | ∠° | 90 | ||
| Stage 3 | ∠° | 90 | ||
| BA07.16-P-1005-01D | Bolt, bracket to high pressure pump | Nm | - | |
| BA07.16-P-1006-01D | Bolt, high-pressure pump to cylinder head | Nm | 14 | |
| BA07.16-P-1007-01D | Nut, pressure line to rail/injector | Stage 1 | Nm | 23 |
| Stage 2 | Nm | - | ||
| BA07.16-P-1008-01D | Shield to thermostat, water pump and cylinder head cover | M6 | Nm | 14 |
| BA07.16-P-1009-01D | Bolt, rail to cylinder head | Nm | 14 | |
| BA07.16-P-1010-01D | Bolt, rail to bracket | Nm | 14 | |
| BA07.16-P-1011-01D | Bolt, bracket to lifting eye | Nm | 9 | |
| BA07.16-P-1012-01D | Pressure regulator valve on rail | Stage 1 | Nm | 80 |
| Stage 2 (loosen) | ∠° | - | ||
| Stage 3 | Nm | - | ||
| BA07.16-P-1013-01D | Rail pressure sensor to rail | Nm | 70 | |
| BA07.16-P-1014-01D | Bolt, quantity control valve to high-pressure pump housing flange | Nm | 7 | |
| BA07.16-P-1015-01D | High-pressure fitting to high-pressure pump | Nm | 55 | |
| BA07.16-P-1017-01D | Fuel line on charge air manifold/support brace | Nm | - | |
| BA07.16-P-1018-01D | Rail bolt on rear lifting eye | Nm | - | |
| BA07.16-P-1019-01D | Pressure line to front lifting eye | Nm | - | |