Common rail diesel injection (CDI) - BA07.16-P-1000-01A
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 611.960/961/962/980/981/983/987, 612.961/962/963/965/966/967/981/990, 613.960/961
COMMON RAIL DIESEL INJECTION (CDI)
| Number | Designation | ENGINE 611.960/961 | ENGINE 611.962 | |||
|---|---|---|---|---|---|---|
| BA07.16-P-1001-01A | Bolt, shutoff valve to cylinder head | Nm | 8 | 8 | ||
| BA07.16-P-1002-01A | Nut, pressure line to high-pressure pump/rail | Nm | 23 | 23 | ||
| BA07.16-P-1003-01A | Rail pressure sensor to rail | Up to production no. | 86512 | Nm | 35 | - |
| As of production no. | 86513 | Nm | 22 | 22 | ||
| As of production no. | 96513 | Nm | - | - | ||
| up to engine no. | 835762 | Nm | - | - | ||
| from engine no. | 835763 | Nm | - | - | ||
| up to engine no. | 846434 | Nm | - | - | ||
| from engine no. | 846435 | Nm | - | - | ||
| BA07.16-P-1004-01A | Bolt, rail to cylinder head | Nm | 14 | 14 | ||
| BA07.16-P-1005-01A | Bolt, pressure regulating valve to rail | Stage 1 | Nm | 3 | 3 | |
| Stage 2 | Nm | 5 | 5 | |||
| BA07.16-P-1006-01A | Banjo bolt, leak oil line to rail | Nm | 20 | 20 | ||
| BA07.16-P-1007-01A | Bolt, clamping claw to injector | Stage 1 | Nm | 7 | 7 | |
| Stage 2 | ∠° | 90 | 90 | |||
| Stage 3 | ∠° | 90 | 90 | |||
| BA07.16-P-1008-01A | Bolt, bracket to high pressure pump | Nm | 9 | 9 | ||
| BA07.16-P-1009-01A | Bolt, high-pressure pump to cylinder head | Nm | 14 | 14 | ||
| BA07.16-P-1010-01A | Bolt, predelivery pump to top cover of cylinder head | Nm | 9 | 9 | ||
| BA07.16-P-1011-01A | Nut, pressure line to rail/injector | Nm | 23 | 23 | ||
| BA07.16-P-1012-01A | Bolt, bracket for fuel supply shutoff valve to timing case cover | Nm | - | - | ||
| BA07.16-P-1013-01A | Bolt, fuel supply shutoff valve to bracket | Nm | - | - | ||
| BA07.16-P-1014-01A | Threaded connection on rail | Nm | 22 | 22 | ||
| BA07.16-P-1015-01A | Pressure pipe connection to injector | Nm | 42 | 42 | ||
| BA07.16-P-1016-01A | High-pressure fitting to high-pressure pump | Nm | 45 | 45 | ||
| BA07.16-P-1017-01A | Element, shutoff valve to high pressure pump | Nm | - | - | ||
| BA07.16-P-1018-01A | Bolt, pump cylinder head to pump housing | Nm | 25 | 25 | ||
COMMON RAIL DIESEL INJECTION (CDI)
| Number | Designation | ENGINE 611.980 | ENGINE 611.981/987 | |||
|---|---|---|---|---|---|---|
| BA07.16-P-1001-01A | Bolt, shutoff valve to cylinder head | Nm | - | 9 | ||
| BA07.16-P-1002-01A | Nut, pressure line to high-pressure pump/rail | Nm | 23 | 23 | ||
| BA07.16-P-1003-01A | Rail pressure sensor to rail | Up to production no. | 86512 | Nm | - | - |
| As of production no. | 86513 | Nm | 22 | - | ||
| As of production no. | 96513 | Nm | 22 | - | ||
| up to engine no. | 835762 | Nm | - | 22 | ||
| from engine no. | 835763 | Nm | - | 70 | ||
| up to engine no. | 846434 | Nm | - | - | ||
| from engine no. | 846435 | Nm | - | - | ||
| BA07.16-P-1004-01A | Bolt, rail to cylinder head | Nm | 14 | 14 | ||
| BA07.16-P-1005-01A | Bolt, pressure regulating valve to rail | Stage 1 | Nm | 3 | 3 | |
| Stage 2 | Nm | 5 | 5 | |||
| BA07.16-P-1006-01A | Banjo bolt, leak oil line to rail | Nm | 20 | 20 | ||
| BA07.16-P-1007-01A | Bolt, clamping claw to injector | Stage 1 | Nm | 7 | 7 | |
| Stage 2 | ∠° | 90 | 90 | |||
| Stage 3 | ∠° | 90 | 90 | |||
| BA07.16-P-1008-01A | Bolt, bracket to high pressure pump | Nm | 9 | 9 | ||
| BA07.16-P-1009-01A | Bolt, high-pressure pump to cylinder head | Nm | 14 | 14 | ||
| BA07.16-P-1010-01A | Bolt, predelivery pump to top cover of cylinder head | Nm | 9 | 9 | ||
| BA07.16-P-1011-01A | Nut, pressure line to rail/injector | Nm | 23 | 23 | ||
| BA07.16-P-1012-01A | Bolt, bracket for fuel supply shutoff valve to timing case cover | Nm | 12 | - | ||
| BA07.16-P-1013-01A | Bolt, fuel supply shutoff valve to bracket | Nm | 8 | - | ||
| BA07.16-P-1014-01A | Threaded connection on rail | Nm | 22 | - | ||
| BA07.16-P-1015-01A | Pressure pipe connection to injector | Nm | 42 | 42 | ||
| BA07.16-P-1016-01A | High-pressure fitting to high-pressure pump | Nm | - | - | ||
| BA07.16-P-1017-01A | Element, shutoff valve to high pressure pump | Nm | - | 3 | ||
| BA07.16-P-1018-01A | Bolt, pump cylinder head to pump housing | Nm | 25 | 25 | ||
COMMON RAIL DIESEL INJECTION (CDI)
| Number | Designation | ENGINE 611.983 | ENGINE 612.961/963 | |||
|---|---|---|---|---|---|---|
| BA07.16-P-1001-01A | Bolt, shutoff valve to cylinder head | Nm | 9 | 8 | ||
| BA07.16-P-1002-01A | Nut, pressure line to high-pressure pump/rail | Nm | 23 | 23 | ||
| BA07.16-P-1003-01A | Rail pressure sensor to rail | Up to production no. | 86512 | Nm | 20 | 22 |
| As of production no. | 86513 | Nm | 22 | 22 | ||
| As of production no. | 96513 | Nm | - | - | ||
| up to engine no. | 835762 | Nm | - | - | ||
| from engine no. | 835763 | Nm | - | - | ||
| up to engine no. | 846434 | Nm | - | - | ||
| from engine no. | 846435 | Nm | - | - | ||
| BA07.16-P-1004-01A | Bolt, rail to cylinder head | Nm | 14 | 14 | ||
| BA07.16-P-1005-01A | Bolt, pressure regulating valve to rail | Stage 1 | Nm | 3 | 3 | |
| Stage 2 | Nm | 5 | 5 | |||
| BA07.16-P-1006-01A | Banjo bolt, leak oil line to rail | Nm | 20 | 20 | ||
| BA07.16-P-1007-01A | Bolt, clamping claw to injector | Stage 1 | Nm | 7 | 7 | |
| Stage 2 | ∠° | 90 | 90 | |||
| Stage 3 | ∠° | 90 | 90 | |||
| BA07.16-P-1008-01A | Bolt, bracket to high pressure pump | Nm | 9 | 9 | ||
| BA07.16-P-1009-01A | Bolt, high-pressure pump to cylinder head | Nm | 14 | 14 | ||
| BA07.16-P-1010-01A | Bolt, predelivery pump to top cover of cylinder head | Nm | 9 | 9 | ||
| BA07.16-P-1011-01A | Nut, pressure line to rail/injector | Nm | 23 | 23 | ||
| BA07.16-P-1012-01A | Bolt, bracket for fuel supply shutoff valve to timing case cover | Nm | - | - | ||
| BA07.16-P-1013-01A | Bolt, fuel supply shutoff valve to bracket | Nm | - | - | ||
| BA07.16-P-1014-01A | Threaded connection on rail | Nm | - | 22 | ||
| BA07.16-P-1015-01A | Pressure pipe connection to injector | Nm | 42 | 42 | ||
| BA07.16-P-1016-01A | High-pressure fitting to high-pressure pump | Nm | - | 45 | ||
| BA07.16-P-1017-01A | Element, shutoff valve to high pressure pump | Nm | - | - | ||
| BA07.16-P-1018-01A | Bolt, pump cylinder head to pump housing | Nm | 25 | 25 | ||
COMMON RAIL DIESEL INJECTION (CDI)
| Number | Designation | ENGINE 612.962/967 | ENGINE 612.965/966 | |||
|---|---|---|---|---|---|---|
| BA07.16-P-1001-01A | Bolt, shutoff valve to cylinder head | Nm | 8 | - | ||
| BA07.16-P-1002-01A | Nut, pressure line to high-pressure pump/rail | Nm | 23 | 23 | ||
| BA07.16-P-1003-01A | Rail pressure sensor to rail | Up to production no. | 86512 | Nm | - | - |
| As of production no. | 86513 | Nm | 22 | 20 | ||
| As of production no. | 96513 | Nm | - | - | ||
| up to engine no. | 835762 | Nm | - | - | ||
| from engine no. | 835763 | Nm | - | - | ||
| up to engine no. | 846434 | Nm | - | - | ||
| from engine no. | 846435 | Nm | - | - | ||
| BA07.16-P-1004-01A | Bolt, rail to cylinder head | Nm | 14 | 14 | ||
| BA07.16-P-1005-01A | Bolt, pressure regulating valve to rail | Stage 1 | Nm | 3 | 3 | |
| Stage 2 | Nm | 5 | 5 | |||
| BA07.16-P-1006-01A | Banjo bolt, leak oil line to rail | Nm | 20 | 20 | ||
| BA07.16-P-1007-01A | Bolt, clamping claw to injector | Stage 1 | Nm | 7 | 7 | |
| Stage 2 | ∠° | 90 | 90 | |||
| Stage 3 | ∠° | 90 | 90 | |||
| BA07.16-P-1008-01A | Bolt, bracket to high pressure pump | Nm | 9 | 9 | ||
| BA07.16-P-1009-01A | Bolt, high-pressure pump to cylinder head | Nm | 14 | 14 | ||
| BA07.16-P-1010-01A | Bolt, predelivery pump to top cover of cylinder head | Nm | 9 | 9 | ||
| BA07.16-P-1011-01A | Nut, pressure line to rail/injector | Nm | 23 | 23 | ||
| BA07.16-P-1012-01A | Bolt, bracket for fuel supply shutoff valve to timing case cover | Nm | - | - | ||
| BA07.16-P-1013-01A | Bolt, fuel supply shutoff valve to bracket | Nm | - | - | ||
| BA07.16-P-1014-01A | Threaded connection on rail | Nm | 22 | - | ||
| BA07.16-P-1015-01A | Pressure pipe connection to injector | Nm | 42 | 42 | ||
| BA07.16-P-1016-01A | High-pressure fitting to high-pressure pump | Nm | 45 | 45 | ||
| BA07.16-P-1017-01A | Element, shutoff valve to high pressure pump | Nm | - | - | ||
| BA07.16-P-1018-01A | Bolt, pump cylinder head to pump housing | Nm | 25 | 25 | ||
COMMON RAIL DIESEL INJECTION (CDI)
| Number | Designation | ENGINE 612.981 | ENGINE 612.990 | |||
|---|---|---|---|---|---|---|
| BA07.16-P-1001-01A | Bolt, shutoff valve to cylinder head | Nm | 9 | - | ||
| BA07.16-P-1002-01A | Nut, pressure line to high-pressure pump/rail | Nm | 23 | 23 | ||
| BA07.16-P-1003-01A | Rail pressure sensor to rail | Up to production no. | 86512 | Nm | - | - |
| As of production no. | 86513 | Nm | - | 22 | ||
| As of production no. | 96513 | Nm | - | - | ||
| up to engine no. | 835762 | Nm | - | - | ||
| from engine no. | 835763 | Nm | - | - | ||
| up to engine no. | 846434 | Nm | 22 | - | ||
| from engine no. | 846435 | Nm | 70 | - | ||
| BA07.16-P-1004-01A | Bolt, rail to cylinder head | Nm | 14 | 16 | ||
| BA07.16-P-1005-01A | Bolt, pressure regulating valve to rail | Stage 1 | Nm | 3 | 3 | |
| Stage 2 | Nm | 5 | 5 | |||
| BA07.16-P-1006-01A | Banjo bolt, leak oil line to rail | Nm | 20 | - | ||
| BA07.16-P-1007-01A | Bolt, clamping claw to injector | Stage 1 | Nm | 7 | 7 | |
| Stage 2 | ∠° | 90 | 90 | |||
| Stage 3 | ∠° | 90 | 90 | |||
| BA07.16-P-1008-01A | Bolt, bracket to high pressure pump | Nm | 9 | - | ||
| BA07.16-P-1009-01A | Bolt, high-pressure pump to cylinder head | Nm | 14 | 14 | ||
| BA07.16-P-1010-01A | Bolt, predelivery pump to top cover of cylinder head | Nm | 9 | - | ||
| BA07.16-P-1011-01A | Nut, pressure line to rail/injector | Nm | 23 | 23 | ||
| BA07.16-P-1012-01A | Bolt, bracket for fuel supply shutoff valve to timing case cover | Nm | - | - | ||
| BA07.16-P-1013-01A | Bolt, fuel supply shutoff valve to bracket | Nm | - | - | ||
| BA07.16-P-1014-01A | Threaded connection on rail | Nm | - | 22 | ||
| BA07.16-P-1015-01A | Pressure pipe connection to injector | Nm | 42 | - | ||
| BA07.16-P-1016-01A | High-pressure fitting to high-pressure pump | Nm | - | 45 | ||
| BA07.16-P-1017-01A | Element, shutoff valve to high pressure pump | Nm | 3 | - | ||
| BA07.16-P-1018-01A | Bolt, pump cylinder head to pump housing | Nm | 25 | 25 | ||
COMMON RAIL DIESEL INJECTION (CDI)
| Number | Designation | ENGINE 613.960/961 | |||
|---|---|---|---|---|---|
| BA07.16-P-1001-01A | Bolt, shutoff valve to cylinder head | Nm | 8 | ||
| BA07.16-P-1002-01A | Nut, pressure line to high-pressure pump/rail | Nm | 23 | ||
| BA07.16-P-1003-01A | Rail pressure sensor to rail | Up to production no. | 86512 | Nm | 35 |
| As of production no. | 86513 | Nm | 22 | ||
| As of production no. | 96513 | Nm | - | ||
| up to engine no. | 835762 | Nm | - | ||
| from engine no. | 835763 | Nm | - | ||
| up to engine no. | 846434 | Nm | - | ||
| from engine no. | 846435 | Nm | - | ||
| BA07.16-P-1004-01A | Bolt, rail to cylinder head | Nm | 14 | ||
| BA07.16-P-1005-01A | Bolt, pressure regulating valve to rail | Stage 1 | Nm | 3 | |
| Stage 2 | Nm | 5 | |||
| BA07.16-P-1006-01A | Banjo bolt, leak oil line to rail | Nm | 20 | ||
| BA07.16-P-1007-01A | Bolt, clamping claw to injector | Stage 1 | Nm | 7 | |
| Stage 2 | ∠° | 90 | |||
| Stage 3 | ∠° | 90 | |||
| BA07.16-P-1008-01A | Bolt, bracket to high pressure pump | Nm | 9 | ||
| BA07.16-P-1009-01A | Bolt, high-pressure pump to cylinder head | Nm | 14 | ||
| BA07.16-P-1010-01A | Bolt, predelivery pump to top cover of cylinder head | Nm | 9 | ||
| BA07.16-P-1011-01A | Nut, pressure line to rail/injector | Nm | 23 | ||
| BA07.16-P-1012-01A | Bolt, bracket for fuel supply shutoff valve to timing case cover | Nm | - | ||
| BA07.16-P-1013-01A | Bolt, fuel supply shutoff valve to bracket | Nm | - | ||
| BA07.16-P-1014-01A | Threaded connection on rail | Nm | 22 | ||
| BA07.16-P-1015-01A | Pressure pipe connection to injector | Nm | 42 | ||
| BA07.16-P-1016-01A | High-pressure fitting to high-pressure pump | Nm | 45 | ||
| BA07.16-P-1017-01A | Element, shutoff valve to high pressure pump | Nm | - | ||
| BA07.16-P-1018-01A | Bolt, pump cylinder head to pump housing | Nm | 25 | ||