Cylinder head - BA01.30-P-1000-01W
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 276
CYLINDER HEAD
| Number | Designation | ENGINE 276 | |||
|---|---|---|---|---|---|
| BA01.30-P-1001-01W | Bolt, cylinder head to crankcase | M11 | Stage 1 | Nm | 20 |
| Stage 2 | Nm | 40 | |||
| Stage 3 | ∠° | 90 | |||
| Stage 4 | ∠° | 90 | |||
| BA01.30-P-1002-01W | Bolt, cylinder head to timing case cover | M7 | Nm | 14 | |
| BA01.30-P-1003-01W | Bolt, front cover to cylinder head/cylinder head cover | Nm | 5 | ||
| BA01.30-P-1004-01W | Stud bolt for exhaust manifold | Nm | 4 | ||
| BA01.30-P-1005-01W | Bolt, lifting eye to front cylinder head | Nm | 8 | ||
| BA01.30-P-1006-01W | Bolt, lifting eye to rear cylinder head on the left | Stage 1 | Nm | 20 | |
| Stage 2 | ∠° | 90 | |||
| BA01.30-P-1007-01W | Bolt, lifting eye to rear cylinder head on the right | Nm | 20 | ||
| BA01.30-P-1008-01W | Bolt, adapter to cylinder head | Nm | 20 | ||