Cylinder head - BA01.30-P-1000-01N
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 177, 178
CYLINDER HEAD
| Number | Designation | ENGINE 177 | ENGINE 178 | |||
|---|---|---|---|---|---|---|
| BA01.30-P-1001-01N | Screw/bolt, cylinder head to crankcase | M7 | Nm | 15 | 15 | |
| M11 | Stage 1 | Nm | 40 | 40 | ||
| Stage 2 | ∠° | 90 | 90 | |||
| Stage 3 | ∠° | 90 | 90 | |||
| Stage 4 | ∠° | 90 | 90 | |||
| BA01.30-P-1002-01N | Bolt, chain case cover to cylinder head | Nm | 4, 5 | 4, 5 | ||
| BA01.30-P-1003-01N | Screw/bolt, heat shield/lifting eye to rear of cylinder head | M6 | Nm | 9 | 9 | |
| BA01.30-P-1004-01N | Bolt, front lifting eye to cylinder head | M7 | Nm | 14 | 14 | |
| BA01.30-P-1005-01N | Stud bolt, exhaust manifold to cylinder head | Nm | 13 | 13 | ||