Cylinder head - BA01.30-P-1000-01J
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 271
CYLINDER HEAD
| Number | Designation | ENGINE 271 | |||
|---|---|---|---|---|---|
| BA01.30-P-1001-01J | Screw/bolt, ground line to front cover | M6 | Nm | 8 | |
| BA01.30-P-1002-01J | Screw/bolt, cylinder head | M10 | Stage 1 | Nm | 45 |
| Stage 2 | ∠° | 90 | |||
| Stage 3 | ∠° | 90 | |||
| - | |||||
| BA01.30-P-1003-01J | Screw/bolt, upper part of camshaft bearing housing to cylinder head | M7 | Stage 1 | Nm | 10 |
| Stage 2 | ∠° | 90 | |||
| BA01.30-P-1004-01J | Screw/bolt, lower part of camshaft bearing housing to cylinder head | M7 | Nm | 14 | |
| BA01.30-P-1005-01J | Screw/bolt, lifting eye to cylinder head | M8 | Nm | 13 | |
| BA01.30-P-1006-01J | Screw/bolt, lifting eye to front cover and camshaft bearing housing | M6 | Nm | 9 | |
| M8 | Nm | 20 | |||
| BA01.30-P-1007-01J | Screw/bolt, front cover to cylinder head | M6 | Nm | 9 | |
| BA01.30-P-1008-01J | Screw/bolt, oil suction pipe to cylinder head | M6 | Nm | 8 | |
| BA01.30-P-1009-01J | Screw/bolt, thermostat housing to cylinder head | M6 | Nm | 9 | |
| BA01.30-P-1011-01J | Screw/bolt, cylinder head cover to camshaft bearing housing | Nm | 9 | ||