LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2015 >> GL350 >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Complete Engine - Torque Specifications) >> Torque Specifications >> Cylinder head >> Cylinder head - BA01.30-P-1000-01C

Cylinder head - BA01.30-P-1000-01C

WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.

ENGINE 601, 602 (except 602.98), 603 

CYLINDER HEAD

Number Designation ENGINE 601 ENGINE 602 except 602.98
BA01.30-P-1001-01C Threaded ring for pre-combustion chamber with vertical injection   Nm 100 100
BA01.30-P-1002-01C Threaded ring for pre-combustion chamber with oblique injection   Nm 130 130
BA01.30-P-1003-01C Bolt, cylinder head M10 Stage 1 Nm 15 15
Stage 2 Nm 35 35
Stage 3 ∠° 90 90
Settling time min 10 10
Stage 4 ∠° 90 90
BA01.30-P-1004-01C Temperature sensors, senders, thermovalves in cylinder head, in outlet nipple on cylinder head or in coolant thermostat housing M14 Nm 20 20
M10 Nm 10 10
BA01.30-P-1005-01C Dual temperature sensor for preglow timer control M14 Nm 25 -
BA01.30-P-1006-01C Bolt, cylinder head cover to cylinder head   Nm 10 10
CYLINDER HEAD

Number Designation ENGINE 603
BA01.30-P-1001-01C Threaded ring for pre-combustion chamber with vertical injection   Nm 100
BA01.30-P-1002-01C Threaded ring for pre-combustion chamber with oblique injection   Nm 130
BA01.30-P-1003-01C Bolt, cylinder head M10 Stage 1 Nm 15
Stage 2 Nm 35
Stage 3 ∠° 90
Settling time min 10
Stage 4 ∠° 90
BA01.30-P-1004-01C Temperature sensors, senders, thermovalves in cylinder head, in outlet nipple on cylinder head or in coolant thermostat housing M14 Nm 20
M10 Nm 10
BA01.30-P-1005-01C Dual temperature sensor for preglow timer control M14 Nm 25
BA01.30-P-1006-01C Bolt, cylinder head cover to cylinder head   Nm 10