Cylinder head - BA01.30-N-1000-01B
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 601, 602/982/983
CYLINDER HEAD
| Number | Designation | ENGINE 601.942/970 | ENGINE 601.943 | |||
|---|---|---|---|---|---|---|
| BA01.30-N-1001-01B | Threaded ring for prechamber in cylinder head | Nm | 130 | 130 | ||
| BA01.30-N-1002-01B | Cylinder head on crankcase | M10 | Stage 1 | Nm | 10 | 10 |
| Stage 2 | Nm | 35 | 35 | |||
| Stage 3 | ∠° | 90 | 90 | |||
| Stage 4 | ∠° | 90 | 90 | |||
| BA01.30-N-1003-01B | Cylinder head on timing case cover | M8 | Nm | 25 | 23 | |
| BA01.30-N-1004-01B | Bolt in chain housing | Nm | - | - | ||
| BA01.30-N-1005-01B | Bolt, bracket for oil dipstick guide tube on cylinder head | Nm | - | - | ||
| BA01.30-N-1006-01B | Bolt, oil dipstick guide tube to fuel filter | Nm | - | - | ||
CYLINDER HEAD
| Number | Designation | ENGINE 602.980 | ENGINE 602.982/983 | |||
|---|---|---|---|---|---|---|
| BA01.30-N-1001-01B | Threaded ring for prechamber in cylinder head | Nm | - | - | ||
| BA01.30-N-1002-01B | Cylinder head on crankcase | M10 | Stage 1 | Nm | 10 | 10 |
| Stage 2 | Nm | 35 | 35 | |||
| Stage 3 | ∠° | 90 | 90 | |||
| Stage 4 | ∠° | 90 | 90 | |||
| BA01.30-N-1003-01B | Cylinder head on timing case cover | M8 | Nm | 23 | 25 | |
| BA01.30-N-1004-01B | Bolt in chain housing | Nm | - | 25 | ||
| BA01.30-N-1005-01B | Bolt, bracket for oil dipstick guide tube on cylinder head | Nm | - | 10 | ||
| BA01.30-N-1006-01B | Bolt, oil dipstick guide tube to fuel filter | Nm | - | - | ||
CYLINDER HEAD
| Number | Designation | ENGINE 602.984/985 | |||
|---|---|---|---|---|---|
| BA01.30-N-1001-01B | Threaded ring for prechamber in cylinder head | Nm | - | ||
| BA01.30-N-1002-01B | Cylinder head on crankcase | M10 | Stage 1 | Nm | 10 |
| Stage 2 | Nm | 35 | |||
| Stage 3 | ∠° | 90 | |||
| Stage 4 | ∠° | 90 | |||
| BA01.30-N-1003-01B | Cylinder head on timing case cover | M8 | Nm | 23 | |
| BA01.30-N-1004-01B | Bolt in chain housing | Nm | - | ||
| BA01.30-N-1005-01B | Bolt, bracket for oil dipstick guide tube on cylinder head | Nm | - | ||
| BA01.30-N-1006-01B | Bolt, oil dipstick guide tube to fuel filter | Nm | - | ||