Crankcase, timing case cover, end cover - BA01.40-P-1000-01Y
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 159
CRANKCASE, TIMING CASE COVER, END COVER
| Number | Designation | ENGINE 159 | |||
|---|---|---|---|---|---|
| BA01.40-P-1001-01Y | Bolt, timing case cover to cylinder crankcase | M8X35 | Stage 1 | Nm | 10 |
| Stage 2 | ∠° | 90 | |||
| M8X/70/80/90 | Stage 1 | Nm | 10 | ||
| Stage 2 | ∠° | 180 | |||
| BA01.40-P-1002-01Y | Screw/bolt, cylinder head bolt to timing case cover chain box on outside | M8 | Nm | 20 | |
| BA01.40-P-1003-01Y | Cylinder head to timing case chain box on inside | M8 | Nm | 20 | |
| BA01.40-P-1004-01Y | Bolt, lifting eye on cylinder crankcase | M8 | Stage 1 | Nm | 10 |
| Stage 2 | ∠° | 180 | |||
| Stage 3 | ∠° | 10 | |||
| BA01.40-P-1005-01Y | Bolt, oxygen sensor holder to crankcase lower section | M8 | Nm | 9 | |
| BA01.40-P-1006-01Y | Engine oil drain screw on timing case cover below | Nm | 30 | ||
| BA01.40-P-1007-01Y | Coolant drain screw on cylinder crankcase | Nm | 15 | ||