Crankcase, timing case cover, end cover - BA01.40-P-1000-01S
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 642
CYLINDER CRANKCASE, TIMING CASE COVER, END COVER
| Number | Designation | ENGINE 642 | |||
|---|---|---|---|---|---|
| BA01.40-P-1001-01S | Screw/bolt, rear end cover to cylinder crankcase | Stage 1 | Nm | 8 | |
| Stage 2 | Nm | 10 | |||
| BA01.40-P-1002-01S | Screw/bolt, front end cover to cylinder crankcase | Nm | 9 | ||
| BA01.40-P-1003-01S | Screw/bolt, lower crankcase section | M6 | Nm | 8, 5 | |
| M8 | Nm | 20 | |||
| M11 | Stage 1 | Nm | 20 | ||
| Stage 2 | Nm | 50 | |||
| Stage 3 | ∠° | 90 | |||
| Stage 4 | ∠° | 90 | |||
| BA01.40-P-1004-01S | Screw/bolt, timing case cover to cylinder crankcase | M6 | Nm | 10 | |
| BA01.40-P-1005-01S | Screw plug, water feed, left water jacket | M24X1.5 | Nm | 45 | |
| BA01.40-P-1006-01S | Screw plug for pressure oil feed upstream of oil filter, external | M18X1.5 | Nm | 30 | |
| BA01.40-P-1007-01S | Screw plug for balance shaft, front | M20X1.5 | Nm | 35 | |
| M18X1.5 | Nm | 30 | |||
| BA01.40-P-1008-01S | Screw plug for balance shaft, rear | M20X1.5 | Nm | 35 | |
| BA01.40-P-1009-01S | Screw/bolt, oil spray nozzle | Nm | 8 | ||