Crankcase, timing case cover, end cover - BA01.40-P-1000-01G
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 111, 271, 272
CYLINDER CRANKCASE, TIMING CASE COVER, END COVER
| Number | Designation | ENGINE 111 | ENGINE 271 | ||
|---|---|---|---|---|---|
| BA01.40-P-1001-01G | Screw/bolt, timing case cover to cylinder crankcase | M8 | Nm | 25 | 20 |
| BA01.40-P-1002-01G | Screw/bolt, cylinder head to timing case cover | Stage 1 | Nm | 18 | 20 |
| Stage 2 | ∠° | 90 | - | ||
| BA01.40-P-1003-01G | Crankcase discharge fitting | Nm | 30 | 12 | |
| BA01.40-P-1004-01G | Screw/bolt, end cover to cylinder crankcase or oil pan | Nm | 10 | 8 | |
| BA01.40-P-1005-01G | Screw/bolt, power steering pump/refrigerant compressor carrier | Nm | 25 | 20 | |
| BA01.40-P-1006-01G | Crankcase plug | Nm | 50 | 45 | |
| BA01.40-P-1007-01G | Screw/bolt, alternator carrier | Nm | 25 | 20 | |
| BA01.40-P-1008-01G | Temperature sensors, senders, thermovalves in cylinder head, in outlet nipple on cylinder head or in coolant thermostat housing | Nm | 10 | - | |
| BA01.40-P-1009-01G | Coolant drain plug to cylinder crankcase | Nm | - | - | |
| BA01.40-P-1010-01G | Screw plug to timing case cover | Nm | - | - | |
| BA01.40-P-1011-01G | Screw/bolt, guide pulley to timing case | Nm | - | 20 | |
| BA01.40-P-1012-01G | Screw/bolt, alternator to timing case | Nm | - | 20 | |
| BA01.40-P-1013-01G | Screw/bolt, intermediate housing to crankcase/oil pan | M6 | Nm | - | - |
| M10 | Nm | - | - | ||
| BA01.40-P-1014-01G | Screw/bolt, intermediate flange to crankcase/oil pan | Nm | - | - | |
| BA01.40-P-1015-01G | Oil temperature regulator to cylinder crankcase | Nm | - | 50 | |
CYLINDER CRANKCASE, TIMING CASE COVER, END COVER
| Number | Designation | ENGINE 272 | ||
|---|---|---|---|---|
| BA01.40-P-1001-01G | Screw/bolt, timing case cover to cylinder crankcase | M8 | Nm | 20 |
| BA01.40-P-1002-01G | Screw/bolt, cylinder head to timing case cover | Stage 1 | Nm | 20 |
| Stage 2 | ∠° | - | ||
| BA01.40-P-1003-01G | Crankcase discharge fitting | Nm | - | |
| BA01.40-P-1004-01G | Screw/bolt, end cover to cylinder crankcase or oil pan | Nm | 8 | |
| BA01.40-P-1005-01G | Screw/bolt, power steering pump/refrigerant compressor carrier | Nm | - | |
| BA01.40-P-1006-01G | Crankcase plug | Nm | - | |
| BA01.40-P-1007-01G | Screw/bolt, alternator carrier | Nm | - | |
| BA01.40-P-1008-01G | Temperature sensors, senders, thermovalves in cylinder head, in outlet nipple on cylinder head or in coolant thermostat housing | Nm | - | |
| BA01.40-P-1009-01G | Coolant drain plug to cylinder crankcase | Nm | 12 | |
| BA01.40-P-1010-01G | Screw plug to timing case cover | Nm | 20 | |
| BA01.40-P-1011-01G | Screw/bolt, guide pulley to timing case | Nm | - | |
| BA01.40-P-1012-01G | Screw/bolt, alternator to timing case | Nm | - | |
| BA01.40-P-1013-01G | Screw/bolt, intermediate housing to crankcase/oil pan | M6 | Nm | 8 |
| M10 | Nm | 38 | ||
| BA01.40-P-1014-01G | Screw/bolt, intermediate flange to crankcase/oil pan | Nm | 9 | |
| BA01.40-P-1015-01G | Oil temperature regulator to cylinder crankcase | Nm | - | |