Crankcase, timing case cover, end cover - BA01.40-P-1000-01F
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 120
CRANKCASE, TIMING CASE COVER, END COVER
| Number | Designation | ENGINE 120 | ||
|---|---|---|---|---|
| BA01.40-P-1001-01F | Timing case cover to cylinder crankcase | M6 | Nm | 9 |
| M8 | Nm | 21 | ||
| BA01.40-P-1002-01F | Bolt, end cover on cylinder crankcase | Nm | 9 | |
| BA01.40-P-1003-01F | Coolant drain screw to cylinder crankcase without plug-on cone | Nm | 30 | |
| BA01.40-P-1004-01F | Nut, crankshaft bearing cap to stud bolt in cylinder crankcase | M8x1 | Nm | 30 |
| BA01.40-P-1005-01F | Nut, crankshaft bearing cap to stud bolt in cylinder crankcase | M10x1 | Nm | 50 |
| BA01.40-P-1006-01F | Side bolt, crankshaft bearing cap to crankcase | M8 | Nm | 30 |
| BA01.40-P-1007-01F | Bolt, knock sensor on cylinder crankcase | Nm | 20 | |
| BA01.40-P-1008-01F | Bolt, bracket for air pump/alternator | M8 | Nm | 25 |
| BA01.40-P-1009-01F | Bolt, oil filter housing to cylinder crankcase | Nm | 25 | |