Test specifications for cylinder bore - BE01.40-P-1000-01J
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 642
MODIFICATION NOTES
| 02.06.2016 | Value changed: Cylinder liner |
CHECK VALUES FOR CYLINDER BORE
| Number | Designation | Engine 642 | ||
|---|---|---|---|---|
| BE01.40-P-1001-01J | Cylinder liner dia. | Standard dimension | mm | 83, 009 |
| Group code letter A | mm | 83, 000...83, 006 | ||
| Group code letter X | mm | 83, 006...83, 012 | ||
| Group code letter B | mm | 83, 012...83, 018 | ||
| Repair stage 1 | mm | 83, 050 | ||
| Repair stage 2 | mm | 83, 100 | ||
| BE01.40-P-1002-01J | Cylinder liner | Wear limit in longitudinal and transverse direction | mm | 0, 02 |
| Permissible difference of cylinder shape (when new) | mm | 0, 000...0, 007 | ||
| Wear limit | mm | 0, 05 | ||
| Permissible deviation from perpendicular to cylinder top | mm | 0, 05 | ||
| Peak-to-valley height (R3Z) | mm | 0, 002...0, 005 | ||
| max. peak-to-valley height (Rmax) | mm | 0, 011 | ||
| BE01.40-P-1003-01J | Honing angle | ∠° | 40...60 | |