124 589 01 35 00 Press-in tool - WS26.00-P-0126C

WARNING: This page does not describe the selected car, but rather 114 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz S65 AMG, 2019 Mercedes-Benz SLC300, 2019 Mercedes-Benz S65 AMG, and 2019 Mercedes-Benz CLA45 AMG. However, it is still accessible from the selected car via links, so may be relevant.

FG 26/Set C

TRANSMISSION 711.67

Use:

For assembling the 1st gear bearing bushing on the main shaft

Fig 1: Identifying Press-In Tool (124 589 01 35 00)

Courtesy of MERCEDES-BENZ USA