000 588 10 62 00 Support plate - WS26.00-P-3309B
WARNING: This page does not describe the selected car, but rather 114 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz S65 AMG, 2019 Mercedes-Benz SLC300, 2019 Mercedes-Benz S65 AMG, and 2019 Mercedes-Benz CLA45 AMG. However, it is still accessible from the selected car via links, so may be relevant.
TRANSMISSION ALL
Use in FG 26/27/Satz B
Purpose:
Transmission plate for assembling and disassembling major assemblies.
Procurement information:
This criteria catalog is intended as an aid for selecting one of the commercially available variants of a workshop equipment item. It merely describes the minimum requirements for fulfilling the Mercedes-Benz standard. No reference is therefore made to manufacturer-specific equipment or items.
NOTE:
When ordering, please note the standard dimension of 35 mm. This can also be achieved using adapters if necessary. The choice of transmission plate depends on the area of application.
Minimum requirements:
- Mercedes-Benz standard diameter for mounting hole: 35 mm