Read out maintenance data from instrument cluster and reset service indicator - AP00.20-P-0043P
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 203, 209
| Read out maintenance data | |||
| 1 | Read out workshop code, remaining time and remaining distance | ||
| MODEL 209.3/4 as of 6/1/05 | GF54.30-P-0002-05QO | ||
| MODEL 209.3/4 up to 5/31/05 | GF54.30-P-0002-05Q | ||
| MODEL 203.7 as of model year 2009 |
GF54.30-P-2020FA | ||
| MODEL 203.0/2/7 as of 6/1/05 up to model year 2008 |
GF54.30-P-0002-05PO | ||
| MODEL 203.0/2/7 as of 4/24/04 up to 5/31/05 | GF54.30-P-0002-05PM | ||
| MODEL 203.0/2 up to 4/23/04 | GF54.30-P-0002-05PP | ||
| MODEL 203.7 up to 4/23/04 The data are required for generation of the vehicle-specific service sheet. |
GF54.30-P-0002-05PC | ||
| Reset service data | |||
| 2 | Reset service indicator | AP00.20-P-0042PIT | |
| If the service is not performed or only partly performed after resetting the maintenance computer, then the maintenance computer has to be reset to the default value again. ↓ Reset service indicator to previous service |
|||
| AP00.20-P-0044AC |