Risk of fire and explosion caused by machining/treating magnesium components - AS60.00-Z-0006-01R
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
Keep away from ignition sources and open flames.
MODEL 171, 172, 211, 215, 219, 230, 450, 451, 452
Potential risks
- Risk of fire and explosion caused by machining/treating magnesium components.
- In addition to this, when mechanically processing with coolant lubricants mixed with water, there is also the danger of hydrogen being produced causing an additional risk of explosion (oxyhydrogen gas).
- Magnesium chips or dust mixed with oxygen have a tendency to burn or explode.
- Further information can be seen in the accident prevention regulations or in the specifications of the professional/trade association.
Safety precautions/instructions
- During machining/treating work do not smoke; stay away from ignition sources and open flames.
- Store and transport magnesium chips only in dry, tightly sealed containers.
These containers must be stored in a cool place.
Fire protective measures and suitable fire extinguishing agents are:
- Fire class D extinguishers (with powder nozzle), dry extinguishing blankets or dry sand.
Under no circumstances:
Use fire extinguishers of fire class A, B, C, water, carbon dioxide (CO 2
) or nitrogen.
First aid measures in the event of burns
- Following administration of first aid you should always consult a medical service and/or a physician.