General notes on retrofitting trim parts - AH68.00-P-0004-01EW
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 212.0##/2## 1#
The following points must be observed when retrofitting trim parts:
- Before starting to retrofit trim in the interior compartment, the corresponding covers must be provided for the flooring, seats, steering wheel, etc. to prevent them from becoming dirty.
- Persons performing work in the vehicle interior should ensure they have clean work clothes and clean hands.
- Do not use dirty or improper tools.
- Always place removed parts on a clean and soft surface.
- If, despite all precautionary measures, a component has become dirty, this part may only be cleaned using products that have been authorized by Daimler AG. When doing so, where possible, the compatibility of the cleaning agent should be tested at a concealed area of the part to be cleaned.
- The lighting bars of the ambiance illumination must always be handled with extreme care as they are very brittle and can break easily.