Remove/install brake pedal - AR29.10-P-4597GR

MODEL 463.202/222/236/237/243/244/245/246/247/248/249/250/254/270/271/303/306/309/322/323/332/333/336/340/341/346

Fig 1: Identifying Brake Pedal Remove/Install Components

Courtesy of MERCEDES-BENZ USA

MODIFICATION NOTES

21.1.11

Turn key in ignition lock to position "0", added

Step 1

	Remove/install
1	Turn key in ignition lock to position "0"
2	Remove left cover under instrument panel (1)		AR68.10-P-1500GM
3	Unplug electrical connector (2) from brake light switch (S9/1)
4	Remove stop lamp switch (S9/1)
5	Detach retaining pin for master cylinder push rod (3)	By pulling the retaining clip (4) off the retaining pin for the master cylinder push rod (3).
6	Detach spring (5)
7	Remove circlip (6).
8	Remove spacer washer (7) and sleeve
9	Remove brake pedal (8)
10	Install in the reverse order