Remove/install stowage box - AR68.72-P-0010SG

MODEL 461 with CODE (ZS4) Special protection version FB4 with CODE (ZS6) Special protection version FB6 with CODE (ZS7) Special protection version FB7 with rear stowage box 

Shown on right-hand side 

Fig 1: Identifying Stowage Box Components

Courtesy of MERCEDES-BENZ USA

Shown on right-hand side 

Fig 2: Identifying Interior Compartment

Courtesy of MERCEDES-BENZ USA

Shown on right-hand side 

Fig 3: Identifying Stowage Box

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Fold back floor covering in area of stowage boxes (1).
2	Remove anchoring lugs from stowage box (1).
3	Remove paneling (2)
4	Unscrew nuts in stowage box (1)
5	Remove screw (6)
6	Remove interior compartment (7)	Pull stowage box (1) away toward side and remove interior compartment (7) toward rear.
7	Remove stowage box (1)	The stowage box (1) is glued in the front area and must carefully be loosened with a mounting wedge (arrows). Installation:  Apply quick-acting adhesive to stowage box (1) in front area.
			Figure
		Window adhesive Art. no. 34805	*BR00.45-Z-1045-02A
8	Install in the reverse order

Fig 4: Identifying Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA