Remove/install paneling on rear pillar - AR68.30-P-4505GK

MODEL 463.222 /236 /237 /243 /244 /245 /246 /247 /248 /249 /270 /271 /322 /323 /332 /333 /336 /340 /341 /346 

Shown on model 463.244 with code (V53) Stowage box and luggage compartment cover, left side 

Fig 1: Identifying Rear Pillar Paneling Components (1 Of 2)

Courtesy of MERCEDES-BENZ USA

Shown on model 463.244, left side 

Fig 2: Identifying Rear Pillar Paneling Components (2 Of 2)

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove luggage compartment cover (A)	If installed.
2	Remove side stowage box cover (B)	Only on model 463.222/244/247/322/332/336/340 with code (V53) Stowage box and luggage compartment cover
3	Remove bolt (D)	Only on model 463.222/244/247/322/332/336/340 with code (V53) Stowage box and luggage compartment cover
4	Remove edge guard (1) from door pillar
5	Remove paneling (2) to side	Disconnect electrical connector from left rear speaker (H4/7h2) or right rear speaker (H4/8h2).
6	Disconnect electrical connector from warning buzzer for ultrasonic backup assist	Only with code (J44) Ultrasonic backup assist and only when removing the right cover (2).
7	Install in the reverse order