Remove/install center console - AR68.20-P-2000GW

MODEL 463 as of model year 2013/model refinement package 2012 

Fig 1: Identifying Center Console Components (1 Of 2)

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Center Console Components (2 Of 2)

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Detach ground line from battery		AR54.10-P-0003GW
	Notes on battery		AH54.10-P-0001-01A
2	Remove bolts (4) in stowage compartment on center armrest
3	Unclip center console top section (1) upward
4	Disconnect electrical connectors from center console	Press in catch tabs and pull out electrical connectors.
5	Disconnect electrical line from 12 V socket
6	Unscrew bolts (5) and unclip shift gate (6) upward at an angle
7	Disconnect electrical connectors from shift gate (6)
8	Unclip cover (3) from hand brake lever		AR68.20-P-2311-01GW
			Figure
9	Remove bolts (7)
10	Unscrew nuts (8)
11	Remove bolts (9)
12	Unscrew bolts (10) on right and left side
13	Remove center console bottom section (2)
14	Install in the reverse order
15	Read out and erase the fault memory using Star Diagnosis		AD00.00-P-2000-04A

Fig 3: Identifying Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA