Disc Rotor: Remove & Replace
WARNING: This page is about the E400 4Matic, 2D Coupe, which is a different variant/trim than selected.
Includes: Replace Pads (if necessary). DOES NOT include refinishing.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 4Matic,Base, Front,Both | 1.6 | B | ||
| 4Matic,Base, Front,One Side | 0.9 | B | ||
| 4Matic,Base, Rear,Both | 2.2 | B | ||
| 4Matic,Base, Rear,One Side | 1.2 | B | ||
| Combination Procedure: DISC ROTOR (REMOVED): Refinish: DOES NOT include grind hot spots. | ||||
| Each Additional | 0.3 | B | ||
| One | 0.5 | B | ||