Check caster and assign to tabular value - AR40.20-P-0322-03EW
MODEL 212
TEST AND ADJUSTMENT VALUES FOR CASTER
| Number | Designation | MODEL 212 | |
|---|---|---|---|
| BE40.20-P-1002-20L | Permissible difference in caster between right and left side of vehicle | ∠° | ±0° 30' |
TEST AND ADJUSTMENT VALUES FOR CASTER
| Number | Designation | MODEL 212 | |
|---|---|---|---|
| BE40.20-P-1003-20L | Absolute caster tolerance | ∠° | ±0° 30' |
TEST AND ADJUSTMENT VALUES FOR CASTER
| Number | Designation | MODEL 212 |
|---|---|---|
| BE40.20-P-1001-20L | Caster values, form | |
| See | OF40.20-P-3000-00EW |
The level values are displayed by the electronic inclinometer in decimal degrees [°].
- Obtain the caster value from the form taking into account the front axle (FA) level values and rear axle (RA) level values measured previously.
Example, see: Caster values, form on model 212 with code 485, except 4MATIC:
Front-axle level value (FA): +2.56° rear-axle level value (RA): +1.60° = Caster value 6° 44' (± 30')