LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2015 >> E350 Base >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Wheels, Chassis Alignment Check - 212 Chassis - 3 Of 3 >> Testing & Repair >> Adjust front axle toe - AR40.20-P-0264CW

Adjust front axle toe - AR40.20-P-0264CW

MODEL 166, 172, 204, 207, 212, 218 

Shown on model 204.0 

Fig 1: Adjusting Front Axle Toe - Shown On Model 204.0
G09976449Courtesy of MERCEDES-BENZ USA

Shown on model 166 

Fig 2: Adjusting Front Axle Toe - Shown On Model 166
G09976451Courtesy of MERCEDES-BENZ USA

Shown on MODEL 204.0 with CODE M005 (4MATIC) 

Fig 3: Adjusting Front Axle Toe - Shown On Model 204.0 With Code M005 (4MATIC) (1 Of 3)
G09976450Courtesy of MERCEDES-BENZ USA
Fig 4: Adjusting Front Axle Toe - Shown On Model 204.0 With Code M005 (4MATIC) (2 Of 3)
G09976452Courtesy of MERCEDES-BENZ USA
Fig 5: Adjusting Front Axle Toe - Shown On Model 204.0 With Code M005 (4MATIC) (3 Of 3)
G09976453Courtesy of MERCEDES-BENZ USA
INSPECT Check     
1 Carry out initial measurement MODEL 204 AR40.20-P-0200CW
MODEL 172, 207, 212, 218 AR40.20-P-0200EW
MODEL 166 AR40.20-P-0200GQ
  Adjust     
2 Deactivate easy entry and exit feature for steering wheel MODEL 166, 172, 204, 207, 212, 218 with CODE 275 (Memory package)  
MODEL 172 with CODE 275 (Memory package)
NOTES The easy entry and exit feature for the steering wheel must be deactivated so that the steering wheel, e.g. when opening or closing the driver door, it doesn't move to another position.
Otherwise, the headliner or the windshield may be damaged if the holding device (055) is installed.		 AR54.30-P-1000-02W
3 Check center position of steering gear (arrow) and center position of steering wheel IMPORTANT The steering gear is in the center position for the steering gear (arrow), when the marking on the cap lines up with the marking on the control valve housing.
If the center position of the steering wheel does not match the center position of the steering gear (arrow):
↓
Move steering wheel by one tooth only.		  
MODEL 166, 172, 212, 218 AR46.10-P-0100EW
MODEL 204, 207 AR46.10-P-0100CW
4 Fix steering wheel in center position using holding device (055); to do this, insert the holding device (055) in front of the sun visor NOTES Protect the emblem in the steering wheel against damage.
Otherwise the holding device (055) may make an indent on the emblem.		  
SPECIAL TOOL Retainer device Fig 6
5 Insert wheel spreader (030), as shown, in front direction of travel between the insides of the wheel    
6 Counterhold tie rod (10) at the hexagon and loosen jam nut (10f)    
7 Adjust toe by turning tie rod (10) MODEL 166 *BE40.20-P-1001-07M 
MODEL 172
without CODE 990 (AMG car docs./desig. plate allocation)		 *BE40.20-P-1001-07T 
MODEL 172 with CODE 990 (AMG car docs./desig. plate allocation) *BE40.20-P-1002-07T 
MODEL 204.0/2/3 *BE40.20-P-1001-07Y 
MODEL 204.9 *BE40.20-P-1001-07ZA 
MODEL 207 *BE40.20-P-1001-07I 
MODEL 212 *BE40.20-P-1001-07BA 
MODEL 218 *BE40.20-P-1002-07R 
8 Tighten jam nut (10f) TORQUE SPECIFICATION
MODEL 172		 *BA46.40-P-1002-01E 
TORQUE SPECIFICATION
MODEL 204
MODEL 207
MODEL 212
MODEL 218		 *BA46.40-P-1002-01N 
TORQUE SPECIFICATION
MODEL 166		 *BA46.40-P-1001-01K 
9 Remove holding device (055)    
10 Remove wheel spreader (030)    
11 Check boot for twisting If boot twisted:
↓
Straighten out boot.		  
12 Activate easy entry/exit feature for the steering wheel MODEL 166, 172, 204, 207, 212, 218  
MODEL 172 with CODE 275 (Memory package) AR54.30-P-1000-02W
INSPECT Check     
13 Conduct initial measurement MODEL 204 AR40.20-P-0200CW
MODEL 172, 207, 212, 218 AR40.20-P-0200EW
MODEL 166 AR40.20-P-0200GQ
CHECK VALUES FOR FRONT AXLE TOE

Number Designation MODEL 212.0 with CODE 485, except 4MATIC MODEL 212.0 with CODE 677, except 4MATIC
BE40.20-P-1001-07BA Total front axle toe at vehicle level +5.80° ∠° - -
+4.85° ∠° - -
+4.20° ∠° - -
+4.16° ∠° - -
+4.08° ∠° - -
+2.67° ∠° - -
+2.66° ∠° - -
+2.60° ∠° - -
+2.56° ∠° 0° 9' (±10') -
+1.49° ∠° - -
+1.18° ∠° - -
+0.27° ∠° - -
+0.25° ∠° - -
+0.12° ∠° - 0° 9' (±10')
CHECK VALUES FOR FRONT AXLE TOE

Number Designation MODEL 212.0 with CODE 485, with 4MATIC MODEL 212.0 with CODE 677, with 4MATIC
BE40.20-P-1001-07BA Total front axle toe at vehicle level +5.80° ∠° - -
+4.85° ∠° - -
+4.20° ∠° - -
+4.16° ∠° - -
+4.08° ∠° - -
+2.67° ∠° - -
+2.66° ∠° 0° 9' (±10') -
+2.60° ∠° - -
+2.56° ∠° - -
+1.49° ∠° - -
+1.18° ∠° - -
+0.27° ∠° - -
+0.25° ∠° - 0° 9' (±10')
+0.12° ∠° - -
CHECK VALUES FOR FRONT AXLE TOE

Number Designation MODEL 212.002 with CODEP 25 MODEL 212.0/2 with CODE 482
BE40.20-P-1001-07BA Total front axle toe at vehicle level +5.80° ∠° - -
+4.85° ∠° - 0° 9' (±10')
+4.20° ∠° - -
+4.16° ∠° - -
+4.08° ∠° - -
+2.67° ∠° - -
+2.66° ∠° - -
+2.60° ∠° - -
+2.56° ∠° - -
+1.49° ∠° 0° 10' (±10') -
+1.18° ∠° - -
+0.27° ∠° - -
+0.25° ∠° - -
+0.12° ∠° - -
CHECK VALUES FOR FRONT AXLE TOE

Number Designation MODEL 212.0/2 with CODE 489, except 4MATIC MODEL 212.0/2 with CODE 489, with 4MATIC
BE40.20-P-1001-07BA Total front axle toe at vehicle level +5.80° ∠° - -
+4.85° ∠° - -
+4.20° ∠° - -
+4.16° ∠° - -
+4.08° ∠° - -
+2.67° ∠° - -
+2.66° ∠° - -
+2.60° ∠° - -
+2.56° ∠° - -
+1.49° ∠° - -
+1.18° ∠° - -
+0.27° ∠° 0° 9' (±10') -
+0.25° ∠° - 0° 9' (±10')
+0.12° ∠° - -
CHECK VALUES FOR FRONT AXLE TOE

Number Designation MODEL 212.1 with CODE 482 MODEL 212.1 with CODE 485
BE40.20-P-1001-07BA Total front axle toe at vehicle level +5.80° ∠° - -
+4.85° ∠° - -
+4.20° ∠° - -
+4.16° ∠° - -
+4.08° ∠° 0° 9' (±10') -
+2.67° ∠° - -
+2.66° ∠° - -
+2.60° ∠° - -
+2.56° ∠° - 0° 9' (±10')
+1.49° ∠° - -
+1.18° ∠° - -
+0.27° ∠° - -
+0.25° ∠° - -
+0.12° ∠° - -
CHECK VALUES FOR FRONT AXLE TOE

Number Designation MODEL 212.2 with CODE 485, except 4MATIC MODEL 212.2 with CODE 677, except 4MATIC
BE40.20-P-1001-07BA Total front axle toe at vehicle level +5.80° ∠° - -
+4.85° ∠° - -
+4.20° ∠° - -
+4.16° ∠° - -
+4.08° ∠° - -
+2.67° ∠° - -
+2.66° ∠° - -
+2.60° ∠° - -
+2.56° ∠° 0° 9' (±10') -
+1.49° ∠° - -
+1.18° ∠° - -
+0.27° ∠° - -
+0.25° ∠° - -
+0.12° ∠° - 0° 9' (±10')
CHECK VALUES FOR FRONT AXLE TOE

Number Designation MODEL 212.2 with CODE 485, with 4MATIC MODEL 212.2 with CODE 677, with 4MATIC
BE40.20-P-1001-07BA Total front axle toe at vehicle level +5.80° ∠° - -
+4.85° ∠° - -
+4.20° ∠° - -
+4.16° ∠° - -
+4.08° ∠° - -
+2.67° ∠° - -
+2.66° ∠° 0° 9' (±10') -
+2.60° ∠° - -
+2.56° ∠° - -
+1.49° ∠° - -
+1.18° ∠° - -
+0.27° ∠° - -
+0.25° ∠° - 0° 9' (±10')
+0.12° ∠° - -
CHECK VALUES FOR FRONT AXLE TOE

Number Designation MODEL 212.025/056/072 with CODE Z04 MODEL 212 AMG up to 11.2011, except 4MATIC
BE40.20-P-1001-07BA Total front axle toe at vehicle level +5.80° ∠° - -
+4.85° ∠° - -
+4.20° ∠° - -
+4.16° ∠° - 0° 30' (±7')
+4.08° ∠° - -
+2.67° ∠° - 0° 20' (±7')
+2.66° ∠° - -
+2.60° ∠° - -
+2.56° ∠° - -
+1.49° ∠° - -
+1.18° ∠° - 0° 10' (±7')
+0.27° ∠° - -
+0.25° ∠° 0° 9' (±10') -
+0.12° ∠° - -
CHECK VALUES FOR FRONT AXLE TOE

Number Designation MODEL 212 AMG as of 12.2011, except 4MATIC MODEL 212 AMG with 4MATIC
BE40.20-P-1001-07BA Total front axle toe at vehicle level +5.80° ∠° - 0° 30' (±7')
+4.85° ∠° - -
+4.20° ∠° - 0° 18' (±7')
+4.16° ∠° 0° 30' (±7') -
+4.08° ∠° - -
+2.67° ∠° 0° 20' (±7') -
+2.66° ∠° - -
+2.60° ∠° - 0° 7' (±7')
+2.56° ∠° - -
+1.49° ∠° - -
+1.18° ∠° 0° 10' (±7') -
+0.27° ∠° - -
+0.25° ∠° - -
+0.12° ∠° - -
CHECK VALUES FOR FRONT AXLE TOE

Number Designation Model 207 with code 483/485/486 except 4MATIC Model 207 with 4MATIC
BE40.20-P-1001-07I Total front axle toe at vehicle level -2.06° ∠° - 0° 10' (±10')
-0.34° ∠° - 0° 10' (±10')
+1.38° ∠° - 0° 10' (±10')
+4.13° ∠° 0° 10' (±10') -
+5.72°   0° 10' (±10') -
+7.31°   0° 10' (±10') -
CHECK VALUES FOR FRONT AXLE TOE

Number Designation Model 166.0 except code 489/491/Z04/Z05 Model 166.0 with code 489, model 166.8
BE40.20-P-1001-07M Total front axle toe at vehicle level +4.03° ∠° - +0° 7' (±7')
+5.26° ∠° - +0° 14' (±7')
+6.49° ∠° - +0° 21' (±7')
+6.74° ∠° - -
+7.84° ∠° +0° 17' (±7') -
+7.97° ∠° - -
+9.07° ∠° +0° 25' (±7') -
+9.20° ∠° - -
+10.30° ∠° +0° 34' (±7') -
CHECK VALUES FOR FRONT AXLE TOE

Number Designation Model 166.0 with Model 166 AMG code 491
BE40.20-P-1001-07M Total front axle toe at vehicle level +4.03° ∠° - +0° 7' (±7')
+5.26° ∠° - +0° 14' (±7')
+6.49° ∠° - +0° 21' (±7')
+6.74° ∠° +0° 17' (±7') -
+7.84° ∠° - -
+7.97° ∠° +0° 25' (±7') -
+9.07° ∠° - -
+9.20° ∠° +0° 33' (±7') -
+10.30° ∠° - -
FRONT AXLE TOE CHECK VALUES

Number Designation Model 172 except AMG
BE40.20-P-1001-07T Front axle overall toe-in ∠° 0° 10' (±10')
CHECK VALUES FOR FRONT AXLE TOE

Number Designation Model 204.0/2 up to model refinement package, with cross strut (old version), with code 482 Model 204.0/2 up to model refinement package, with cross strut (new version), with code 482
BE40.20-P-1001-07Y Total front axle toe at vehicle level +10.64° ∠° - +0°10' (±10')
+10.06° ∠° - -
+9.06° ∠° +0°10' (±10') -
+8.47° ∠° - -
+8.26° ∠° - -
+8.16° ∠° - -
+6.76° ∠° - -
+6.68° ∠° - -
+6.45° ∠° - -
+5.88° ∠° - -
+5.29° ∠° - -
+5.07° ∠° - -
+4.98° ∠° - -
+4.92° ∠° - -
+4.30° ∠° - -
+2.24° ∠° - -
-0.34° ∠° - -
CHECK VALUES FOR FRONT AXLE TOE

Number Designation Model 204.0/2 up to model refinement package, with cross strut (old version), with code 483/486, except 4MATIC Model 204.0/2 up to model refinement package, with cross strut (new version), with code 483/486, except 4MATIC
BE40.20-P-1001-07Y Total front axle toe at vehicle level +10.64° ∠° - -
+10.06° ∠° - -
+9.06° ∠° - -
+8.47° ∠° - -
+8.26° ∠° - +0°10' (±10')
+8.16° ∠° - -
+6.76° ∠° - -
+6.68° ∠° - -
+6.45° ∠° - -
+5.88° ∠° - -
+5.29° ∠° - -
+5.07° ∠° - -
+4.98° ∠° - -
+4.92° ∠° - -
+4.30° ∠° +0°10' (±10') -
+2.24° ∠° - -
-0.34° ∠° - -
CHECK VALUES FOR FRONT AXLE TOE

Number Designation Model 204.0/2 up to model refinement package, with cross strut (old version), with code 485/677, except 4MATIC Model 204.0/2 up to model refinement package, with cross strut (new version), with code 485/677, except 4MATIC
BE40.20-P-1001-07Y Total front axle toe at vehicle level +10.64° ∠° - -
+10.06° ∠° - -
+9.06° ∠° - -
+8.47° ∠° - -
+8.26° ∠° - +0°10' (±10')
+8.16° ∠° - -
+6.76° ∠° - -
+6.68° ∠° +0°10' (±10') -
+6.45° ∠° - -
+5.88° ∠° - -
+5.29° ∠° - -
+5.07° ∠° - -
+4.98° ∠° - -
+4.92° ∠° - -
+4.30° ∠° - -
+2.24° ∠° - -
-0.34° ∠° - -
CHECK VALUES FOR FRONT AXLE TOE

Number Designation Model 204.0/2 as of model refinement package, with code 482 Model 204.0/2 as of model refinement package, with code 483/486, except 4MATIC
BE40.20-P-1001-07Y Total front axle toe at vehicle level +10.64° ∠° +0°10' (±10') -
+10.06° ∠° - -
+9.06° ∠° - -
+8.47° ∠° - -
+8.26° ∠° - +0°10' (±10')
+8.16° ∠° - -
+6.76° ∠° - -
+6.68° ∠° - -
+6.45° ∠° - -
+5.88° ∠° - -
+5.29° ∠° - -
+5.07° ∠° - -
+4.98° ∠° - -
+4.92° ∠° - -
+4.30° ∠° - -
+2.24° ∠° - -
-0.34° ∠° - -
CHECK VALUES FOR FRONT AXLE TOE

Number Designation Model 204.0/2 as of model refinement package, with code 485, except 4MATIC Model 204.0/2 as of model refinement package, with code 677, except 4MATIC
BE40.20-P-1001-07Y Total front axle toe at vehicle level +10.64° ∠° - -
+10.06° ∠° - -
+9.06° ∠° - -
+8.47° ∠° - -
+8.26° ∠° +0°10' (±10') +0°10' (±10')
+8.16° ∠° - -
+6.76° ∠° - -
+6.68° ∠° - -
+6.45° ∠° - -
+5.88° ∠° - -
+5.29° ∠° - -
+5.07° ∠° - -
+4.98° ∠° - -
+4.92° ∠° - -
+4.30° ∠° - -
+2.24° ∠° - -
-0.34° ∠° - -
CHECK VALUES FOR FRONT AXLE TOE

Number Designation Model 204.3 with code 483/486, except code P84, except 4MATIC Model 204.3 with code 677, except 4MATIC
BE40.20-P-1001-07Y Total front axle toe at vehicle level +10.64° ∠° - -
+10.06° ∠° - -
+9.06° ∠° - -
+8.47° ∠° - -
+8.26° ∠° +0°10' (±10') +0°10' (±10')
+8.16° ∠° - -
+6.76° ∠° - -
+6.68° ∠° - -
+6.45° ∠° - -
+5.88° ∠° - -
+5.29° ∠° - -
+5.07° ∠° - -
+4.98° ∠° - -
+4.92° ∠° - -
+4.30° ∠° - -
+2.24° ∠° - -
-0.34° ∠° - -
CHECK VALUES FOR FRONT AXLE TOE

Number Designation Model 204.3 with code P84 Model 204.0/2/3 with 4MATIC, with code 486
BE40.20-P-1001-07Y Total front axle toe at vehicle level +10.64° ∠° - -
+10.06° ∠° - -
+9.06° ∠° - -
+8.47° ∠° - -
+8.26° ∠° - -
+8.16° ∠° - -
+6.76° ∠° - -
+6.68° ∠° - -
+6.45° ∠° - -
+5.88° ∠° - -
+5.29° ∠° - -
+5.07° ∠° - -
+4.98° ∠° - -
+4.92° ∠° +0°10' (±10') -
+4.30° ∠° - -
+2.24° ∠° - -
-0.34° ∠° - +0°10' (±10')
CHECK VALUES FOR FRONT AXLE TOE

Number Designation Model 204.0/2/3 with 4MATIC, with code 677 Model 204.0/2 AMG, up to model refinement package
BE40.20-P-1001-07Y Total front axle toe at vehicle level +10.64° ∠° - -
+10.06° ∠° - -
+9.06° ∠° - -
+8.47° ∠° - -
+8.26° ∠° - -
+8.16° ∠° - -
+6.76° ∠° - -
+6.68° ∠° - -
+6.45° ∠° - +0°20' (±10')
+5.88° ∠° - -
+5.29° ∠° - -
+5.07° ∠° - -
+4.98° ∠° - -
+4.92° ∠° - -
+4.30° ∠° - -
+2.24° ∠° +0°10' (±10') -
-0.34° ∠° - -
CHECK VALUES FOR FRONT AXLE TOE

Number Designation Model 204.0/2 AMG, as of model refinement package, model 204.3 AMG, except code P98 Model 204.3 AMG, with code P98
BE40.20-P-1001-07Y Total front axle toe at vehicle level +10.64° ∠° - -
+10.06° ∠° - -
+9.06° ∠° - -
+8.47° ∠° - -
+8.26° ∠° - -
+8.16° ∠° - -
+6.76° ∠° +0°21' (±10') -
+6.68° ∠° - -
+6.45° ∠° - -
+5.88° ∠° - -
+5.29° ∠° - -
+5.07° ∠° - +0°15' (±10')
+4.98° ∠° - -
+4.92° ∠° - -
+4.30° ∠° - -
+2.24° ∠° - -
-0.34° ∠° - -
CHECK VALUES FOR FRONT AXLE TOE

Number Designation Model 204.9 with code 485, except code 460/494/830 Model 204.9 as of model refinement package, with code 491, except code 460/494/830
BE40.20-P-1001-07ZA Total front axle toe at vehicle level +10.06° ∠° - -
+8.47° ∠° - -
+8.16° ∠° +0° 10' (±10') -
+5.29° ∠° - +0° 10' (±10')
+4.98° ∠° - -
CHECK VALUES FOR FRONT AXLE TOE

Number Designation Model 204.9 with code 482 Model 204.9 with code 486
BE40.20-P-1001-07ZA Total front axle toe at vehicle level +10.06° ∠° +0° 10' (±10') -
+8.47° ∠° - -
+8.16° ∠° - -
+5.29° ∠° - -
+4.98° ∠° - +0° 10' (±10')
CHECK VALUES FOR FRONT AXLE TOE

Number Designation Model 204.9 with code 460/494/830
BE40.20-P-1001-07ZA Total front axle toe at vehicle level +10.06° ∠° -
+8.47° ∠° +0° 10' (±10')
+8.16° ∠° -
+5.29° ∠° -
+4.98° ∠° -
CHECK VALUES FOR FRONT AXLE TOE

Number Designation Model 218.3 except 4MATIC, except code 489 Model 218.9 except 4MATIC, except code 489
BE40.20-P-1002-07R Total front axle toe at vehicle level -1.16° ∠° - -
-0.49° ∠° - -
+0.18° ∠° - -
+0, 85 ∠° - -
+1.08° ∠° 0° 10' (±10') 0° 10' (±10')
+1.18° ∠° - -
+1.52° ∠° - -
+2.19° ∠° - -
+2.59° ∠° 0° 10' (±10') 0° 10' (±10')
+2.60° ∠° - -
+2.67° ∠° - -
+4.09° ∠° 0° 10' (±10') 0° 10' (±10')
+4.16° ∠° - -
+4.20° ∠° - -
+5.80° ∠° - -
CHECK VALUES FOR FRONT AXLE TOE

Number Designation MODEL 218 except 4MATIC, with CODE 489 Model 218.3 with 4MATIC, except CODE 489
BE40.20-P-1002-07R Total front axle toe at vehicle level -1.16° ∠° - 0° 10' (±10')
-0.49° ∠° - -
+0.18° ∠° - 0° 10' (±10')
+0, 85 ∠° - -
+1.08° ∠° 0° 10' (±10') -
+1.18° ∠° - -
+1.52° ∠° - 0° 10' (±10')
+2.19° ∠° - -
+2.59° ∠° 0° 10' (±10') -
+2.60° ∠° - -
+2.67° ∠° - -
+4.09° ∠° 0° 10' (±10') -
+4.16° ∠° - -
+4.20° ∠° - -
+5.80° ∠° - -
CHECK VALUES FOR FRONT AXLE TOE

Number Designation MODEL 218.9 with 4MATIC, except code 489 MODEL 218 with 4MATIC, with code 489
BE40.20-P-1002-07R Total front axle toe at vehicle level -1.16° ∠° - -
-0.49° ∠° 0° 10' (±10') 0° 10' (±10')
+0.18° ∠° - -
+0, 85 ∠° 0° 10' (±10') 0° 10' (±10')
+1.08° ∠° - -
+1.18° ∠° - -
+1.52° ∠° - -
+2.19° ∠° 0° 10' (±10') 0° 10' (±10')
+2.59° ∠° - -
+2.60° ∠° - -
+2.67° ∠° - -
+4.09° ∠° - -
+4.16° ∠° - -
+4.20° ∠° - -
+5.80° ∠° - -
CHECK VALUES FOR FRONT AXLE TOE

Number Designation Model 218.3 AMG up to 11.2011 Model 218.3 AMG as of 12.2011 except 4MATIC
BE40.20-P-1002-07R Total front axle toe at vehicle level -1.16° ∠° - -
-0.49° ∠° - -
+0.18° ∠° - -
+0, 85 ∠° - -
+1.08° ∠° - -
+1.18° ∠° 0° 10' (±7') 0° 10' (±7')
+1.52° ∠° - -
+2.19° ∠° - -
+2.59° ∠° - -
+2.60° ∠° - -
+2.67° ∠° 0° 20' (±7') 0° 20' (±7')
+4.09° ∠° - -
+4.16° ∠° 0° 30' (±7) 0° 30' (±7)
+4.20° ∠° - -
+5.80° ∠° - -
CHECK VALUES FOR FRONT AXLE TOE

Number Designation Model 218.9 AMG except 4MATIC Model 218.3/9 AMG with 4MATIC
BE40.20-P-1002-07R Total front axle toe at vehicle level -1.16° ∠° - -
-0.49° ∠° - -
+0.18° ∠° - -
+0, 85 ∠° - -
+1.08° ∠° - -
+1.18° ∠° 0° 10' (±7') -
+1.52° ∠° - -
+2.19° ∠° - -
+2.59° ∠° - -
+2.60° ∠° - 0° 7' (±7)
+2.67° ∠° 0° 20' (±7') -
+4.09° ∠° - -
+4.16° ∠° 0° 30' (±7) -
+4.20° ∠° - 0° 18' (±7)
+5.80° ∠° - 0° 30' (±7)
FRONT AXLE TOE CHECK VALUES

Number Designation MODEL 172 AMG
BE40.20-P-1002-07T Total front axle toe with vehicle level +4.07° ∠° +0° 17' (±10')
+3.74° ∠° +0° 16' (±10')
+3.42° ∠° +0° 16' (±10')
+3.10° ∠° +0° 15' (±10')
+2.78° ∠° +0° 14' (±10')
+2.46° ∠° +0° 13' (±10')
+2.13° ∠° +0° 12' (±10')
+1.81° ∠° +0° 11' (±10')
+1.49° ∠° +0° 10' (±10')
+1.17° ∠° +0° 09' (±10')
+0.85° ∠° +0° 08' (±10')
TIE ROD

Number Designation MODEL 166
BA46.40-P-1001-01K Clamping nut, tie rod to inner tie rod Nm 77
TIE ROD

Number Designation MODEL 172
BA46.40-P-1002-01E Lock nut, tie rod to inner tie rod Nm 65
TIE ROD

Number Designation MODEL 204 MODEL 207
BA46.40-P-1002-01N Jam nut, tie rod to inner tie rod Nm 65 65
TIE ROD

Number Designation MODEL 212 MODEL 218
BA46.40-P-1002-01N Jam nut, tie rod to inner tie rod Nm 65 65
Fig 6: Identifying Retainer Device (129 589 01 21 00)
G09976454Courtesy of MERCEDES-BENZ USA
scientia non olet · About LEMON Manuals