Modify fastening of electrical line on compressor - AR32.22-P-2001-04EW

MODEL 212 

A Version for 212.2 

B Version for 212.0/1 

Fig 1: Airmatic Compressor Components

Courtesy of MERCEDES-BENZ USA

The attachment of the electrical line and the position of the electrical connector (4) on compressor (A9/1) for model 212.0/1 and 212.2 are of a different design.

Only the version for model 212.2 (see picture A, refer to Fig 1) is supplied as a replacement part.

No modifications must be carried out when fitting to model 212.2.

When fitting to model 212.0/1 the attachment of the electrical line and the position of the electrical connector (4) must be modified.

1. Unclip electrical connector (4) from bracket for compressor (2)
2. Unclip clip with cable tie (3) on bracket for compressor (2)
3. Fasten clip with cable tie (3) on bracket for compressor (2) (see picture B, refer to Fig 1)
4. Fasten electrical connector (4) on bracket for compressor (2) (see picture B, refer to Fig 1)