Pulling off joint flange - AR35.31-P-0550-06CWC

MODEL 204, 212 with CODE 700 (Technology Local Content China) 

Fig 1: Identifying Puller (124 589 04 33 00)

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Pin Wrench (129 589 01 07 00)

Courtesy of MERCEDES-BENZ USA

Fig 3: Identifying Adapter (100 589 02 59 00)

Courtesy of MERCEDES-BENZ USA

Fig 4: Identifying Socket Wrench Bit (204 589 01 09 00)

Courtesy of MERCEDES-BENZ USA

1. Mark position of joint flange (1) relative to groove (arrow) on drive pinion (2) with colored pencil.
   Fig 5: Joint Flange, Drive Pinion And Collar Nut

   Courtesy of MERCEDES-BENZ USA
2. Plug Allen wrench (010) into joint flange (1).
3. Unscrew collar nut (3) with connection piece and socket.
   Fig 6: Plug Allen Wrench Into Joint Flange

   Courtesy of MERCEDES-BENZ USA
4. Detach joint flange (1) using puller (020).
   Fig 7: Detaching Joint Flange Using Puller

   Courtesy of MERCEDES-BENZ USA