Remove/install expansion reservoir - AR46.25-P-1000EWI

MODEL 172, 207, 212 with ENGINE 651 

Fig 1: Expansion Reservoir Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove power steering pump (1)		AR46.30-P-0500EWI
2	Release clip (2)
3	Remove bolt (3) and remove expansion reservoir (4) from power steering pump (1)	Seal connections immediately. Replace gaskets.
			Figure
			*BA46.30-P-1003-01R
			*BA46.30-P-1003-01T
4	Install in the reverse order
5	Fill and bleed power steering pump (1)	Model 172	AR46.30-P-0010V
		Model 207	AR46.30-P-0010CW
		Model 212	AR46.30-P-0010EW

POWER STEERING PUMP

Number	Designation		Model 172 without engine 152	Model 172 with engine 152
BA46.30-P-1003-01R	Expansion reservoir bolt	Nm	9	9

POWER STEERING PUMP

Number	Designation		Model 212
BA46.30-P-1003-01T	Expansion reservoir bolt	Nm	9

Fig 2: Identifying Set Of Stop Plugs (129 589 00 91 00)

Courtesy of MERCEDES-BENZ USA