Connect STAR DIAGNOSIS and read out fault memory - AD00.00-P-2000-04B

MODEL 190 

MODEL 205 

MODEL 217 

MODEL 222 

MODEL 253 

1. Connect diagnostic system (1) to diagnostic connector (X11/4) in the driver footwell.
2. Start XENTRY.
3. Select the model series in the menu via the path Selection → Brand → Product group → Vehicle.

   The work procedures are menu-assisted.

   Stored faults which may be caused by disconnecting cables or by simulation during testing operations must be deleted in the diagnostic trouble code memory following completion of the operations.

   Fig 1: Connecting Diagnostic System To Diagnostic Connector (X11/4)

   Courtesy of MERCEDES-BENZ USA
4. Disconnect diagnostic system (1).