Connect STAR DIAGNOSIS and read out fault memory - AD00.00-P-2000-04A

MODEL 117, 124.034/036, 129, 140, 156, 163, 164, 166, 168, 169, 170, 171.4, 172, 176, 197, 199, 202, 203, 204, 207, 208, 209, 210, 211, 212, 215, 216, 218, 219, 220, 221, 230, 231, 240, 242, 245, 246, 251, 292, 414 

MODEL 461, 463 

Shown on model 210 

Fig 1: Diagnostic System And Connector - Shown On Model 210

Courtesy of MERCEDES-BENZ USA

Shown on model 204 

Fig 2: Connecting Diagnostic System To Diagnostic Connector - Shown On Model 204

Courtesy of MERCEDES-BENZ USA

1. Connect diagnostic system (2) to diagnostic connector (1).
2. Start diagnosis.
3. Select the model series in the menu.

   Stored faults which may be caused by disconnecting cables or by simulation during testing operations must be deleted in the diagnostic trouble code memory following completion of the operations.

   The work procedures in the diagnosis program are menu-assisted.

4. Disconnect diagnostic system (2).

   Following completion of diagnostic operations.