Retrofit head-up display wiring harness - AZ54.30-P-0002-01EW

MODEL 212.### 1# 

Fig 1: Head-Up Display Wiring Harness And Connector

Courtesy of MERCEDES-BENZ USA

Routing diagram 

Fig 2: Head-Up Display Wiring Harness Routing Diagram

Courtesy of MERCEDES-BENZ USA

1. Remove black, 18-pin plug insert (4.1) from white connector housing (4.2) of instrument cluster wiring harness (4).
2. Install black, 18-pin plug insert (15) of head-up display wiring harness (2) into white connector housing (4.2).
   Fig 3: Removing Instrument Cluster Wiring Harness Connectors

   Courtesy of MERCEDES-BENZ USA
3. Install black 18-pin plug insert (4.1) of instrument cluster wiring harness (4) in the black connector housing (17) (arrow).

   The black connector housing (17) is part of the package contents.

4. Connect black, 18-pin plug (4.1) of instrument cluster wiring harness (4) to black, 18-pin connector (2.1) of Y-connection for head-up display wiring harness (2).
5. Guide head-up display wiring harness into the instrument panel through the opening created earlier.
6. Insert white, 18-pin plug of head-up display wiring harness into instrument cluster.
   Fig 4: Removing Instrument Cluster Wiring Harness From Connector

   Courtesy of MERCEDES-BENZ USA