Remove/install water drain rail for sliding roof - AR77.20-P-1997CW

MODEL 204.0/2 with CODE (414) Power glass tilting/sliding roof 

MODEL 212 with CODE (414) Power glass tilting/sliding roof up to model year 2011 

Shown on model 204.0 

Fig 1: Water Drain Rail For Sliding Roof Remove/Install Components - Shown On Model 204.0

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove tilting/sliding roof panel		AR77.20-P-2852CW
2	Unclip water drain rail (1) from left and right tilting bracket (2) (arrow)
3	Unclip water drain rail (1) from left and right slider (3) and remove.	When water drain rail (1) is removed, do not move tilting/sliding roof toward rear. This can cause the sliders (3) to be pushed toward the rear making it necessary to preposition them toward the front with great effort.
4	Install in the reverse order