Opening engine hood, moving to upright position and closing - AR88.40-P-1000EW
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 204.3, 207, 212
Shown with CODE (U60) Pedestrian protection
| Open | |||
| Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, liftgates or sliding roof | Keep body parts and limbs well clear of moving parts. | AS00.00-Z-0011-01A | |
| 1 | Pull release lever (1) in driver's footwell to release engine hood (2) | ||
| 2 | Press locking lever (3) upward and open engine hood (2) | ||
| Move to upright position | |||
| 3 | Remove left and right clamping lever (6) at top on left and right engine hood hinge (4) | On vehicles with CODE (U60) Pedestrian protection | AR91.60-P-0920EW |
| 4 | Push engine hood (2) upward and position vertically. | ||
| Close | |||
| 5 | Install left and right clamping lever (6) at top on left and right engine hood hinge (4) | On vehicles with CODE (U60) Pedestrian protection |
|
| 6 | Close lock (5) on left and right clamping lever (6) | On vehicles with CODE (U60) Pedestrian protection | |
| 7 | Close engine hood (2) | ||
| 8 | Ensure that engine hood locks (2) properly |