LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2015 >> CLA250 Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Hydraulic & Mechanical Systems - 117 Chassis >> Testing & Repair >> Replace brake hoses - AR42.10-P-0013NKB

Replace brake hoses - AR42.10-P-0013NKB

MODEL 117, 156, 176, 242, 246 

Shown on MODEL 246 

Fig 1: Brake Hose Components - Shown On Model 246
G10251085Courtesy of MERCEDES-BENZ USA
DANGER Risk of poisoning  from swallowing brake fluid. Risk of injury  from skin and eye contact with brake fluid Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. AS42.50-Z-0001-01A
NOTES Notes on externally invisible brake fluid loss   AH42.10-P-9406-02V
NOTES Notes on installing brake hoses   AH42.10-P-9406-01A
NOTES Brake fluid notes   AH42.50-P-0001-01A
NOTES Notes on repairs to brake system   AH42.00-P-0003-01A
REMOVINGINSTALLING Remove/install     
1 Detach corresponding complete wheel    
REFER TO MAINTENANCE AP40.10-P-4050AK
  Remove front brake hose (2)     
2 Detach front brake hose (2) on front brake line (3) and seal front brake line (3) with plug INSTALLATION NOTES
Install front brake hose (2) without any chafing and free of torsion.
The front brake hose (2) will otherwise be damaged.
INSTALLATION IMPORTANT Ensure that retaining clamp is correctly seated.		  
TORQUE SPECIFICATION Retaining screw, brake line to brake hose *BA42.10-P-1001-04L 
SPECIAL TOOL Record plug Fig 2
3 Open mounting clip and take front brake hose (2) out of bracket (4)    
4 Detach front brake hose (2) from front brake caliper (1) TORQUE SPECIFICATION Brake hose to fixed or floating caliper on front axle *BA42.10-P-1002-04L 
  Remove rear brake hose (6)     
5 Detach rear brake hose (6) on rear brake line (7) and seal rear brake line (7) with plug INSTALLATION NOTES
Install rear brake hose (6) without any chafing and free of torsion.
Otherwise, the rear brake hose (6) will be damaged.
NOTES Seal the connections immediately to avoid damage being caused by brake fluid running out. The rear brake caliper (5) must not run empty.
The rear brake caliper (5) must otherwise be replaced.
INSTALLATION IMPORTANT Ensure that retaining clamp is correctly seated.		  
TORQUE SPECIFICATION Retaining screw, brake line to brake hose *BA42.10-P-1001-04L 
SPECIAL TOOL Record plug Fig 2
6 Detach rear brake hose (6) from rear brake caliper (5) TORQUE SPECIFICATION Brake hose to fixed or floating caliper on rear axle *BA42.10-P-1006-04L 
7 Install in the reverse order    
8 Bleed brake system   AR42.10-P-0010NKB 
BRAKE LINES, BRAKE HOSES

Number Designation MODEL 117 MODEL 156
BA42.10-P-1001-04L Retaining screw, brake line to brake hose Nm 16 16
BRAKE LINES, BRAKE HOSES

Number Designation MODEL 176 MODEL 242
BA42.10-P-1001-04L Retaining screw, brake line to brake hose Nm 16 16
BRAKE LINES, BRAKE HOSES

Number Designation MODEL 246
BA42.10-P-1001-04L Retaining screw, brake line to brake hose Nm 16
BRAKE LINES, BRAKE HOSES

Number Designation MODEL 117 MODEL 156
BA42.10-P-1002-04L Brake hose to fixed or floating caliper on front axle Nm 24 24
BRAKE LINES, BRAKE HOSES

Number Designation MODEL 176 MODEL 242
BA42.10-P-1002-04L Brake hose to fixed or floating caliper on front axle Nm 24 24
BRAKE LINES, BRAKE HOSES

Number Designation MODEL 246
BA42.10-P-1002-04L Brake hose to fixed or floating caliper on front axle Nm 24
BRAKE LINES, BRAKE HOSES

Number Designation MODEL 117 MODEL 156
BA42.10-P-1006-04L Brake hose to fixed or floating caliper on rear axle Nm 24 24
BRAKE LINES, BRAKE HOSES

Number Designation MODEL 176 MODEL 242
BA42.10-P-1006-04L Brake hose to fixed or floating caliper on rear axle Nm 24 24
BRAKE LINES, BRAKE HOSES

Number Designation MODEL 246
BA42.10-P-1006-04L Brake hose to fixed or floating caliper on rear axle Nm 24
Fig 2: Record Plug (129 589 00 91 00)
G09975019Courtesy of MERCEDES-BENZ USA
scientia non olet · About LEMON Manuals