Apply Adhesive Material To Front Glass Cover - AR77.21-P-7010-04NKA
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2023 Mercedes-Benz C43 AMG, 2022 Mercedes-Benz C43 AMG, 2021 Mercedes-Benz C43 AMG, 2020 Mercedes-Benz C43 AMG, and 2019 Mercedes-Benz C43 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 117, 156, 176, 205, 222, 253 with code 413 (Automatic panoramic sliding sunroof)
Model 222 with code 398 (Panoramic roof with MAGIC SKY CONTROL)
| Notes on removal/installation of bonded elements of panoramic roof | AH77.21-P-0001-01A |
MODIFICATION NOTES
| 29.05.2018 | Notes on removal/installation of bonded elements of panoramic roof added. |
Shown on MODEL 176
- Guide electric squeeze gun with application nozzle along bonding surfaces (1) on panoramic sliding sunroof frame (2) and apply adhesive material evenly.
- Immediately remove soiling caused by adhesive.
Only if necessary.
- Completely press excess adhesive out immediately after application and dispose of it properly.