Propeller shaft - BA41.10-P-1000-01C
MODEL 163
DRIVE SHAFT
| Number | Designation | MODEL 163 | |
|---|---|---|---|
| BA41.10-P-1001-01C | Self-locking screw, front drive shaft to transfer case (rear axle side) | Nm | 40 |
| BA41.10-P-1002-01C | Self-locking bolt, rear drive shaft to rear axle center section | Nm | 50 |
| BA41.10-P-1003-01C | Self-locking bolt, drive shaft to transfer case (to front axle) | Nm | 50 |
| BA41.10-P-1004-01C | Self-locking bolt, drive shaft to front axle gear | Nm | 40 |
| BA41.10-P-1005-01C | Self-locking bolt, clamp to cardan shaft | Nm | 20 |
| BA41.10-P-1006-01C | Clamping nut of drive shaft | Nm | 150 |