Remove/install bottom engine compartment paneling - AR61.20-P-1105LW

Model 205 

Model 253 

Shown on model 205 with engine 651 except code 481 (Underbody protection) 

Fig 1: Identifying Bottom Engine Compartment Paneling Remove/Install Components - Shown On Model 205

Courtesy of MERCEDES-BENZ USA

Picture no., etc.	Work notes
	Lift/lower vehicle		AR00.60-P-1002LWG
1	Front engine compartment paneling	Center engine compartment paneling (2) must be removed.
2	Center engine compartment paneling
3	Rear engine compartment paneling	Model 205 with code 481 (Sump shield) Model 253 with code 430 (Offroad package) with code 481 (Sump shield) Center engine compartment paneling (2) must be removed.
4	Bolts
5	Bolts	Model 205 with code 481 (Sump shield) Model 253 with code 430 (Offroad package) with code 481 (Sump shield) Screw/bolt, underride guard	*BA61.40-P-1001-01D
6	Bolts	Model 205 with code 481 (Sump shield) Model 253 with code 430 (Offroad package) with code 481 (Sump shield) Screw/bolt, underride guard	*BA61.40-P-1001-01D
7	Bolts