Remove/install light switch module - AR54.25-P-3270LW

Model 205, 253 

Fig 1: Identifying Light Switch Module Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Remove seal (1) in area of instrument panel cover (2)
2	Remove instrument panel cover (2)
3	Unlock left fuse and relay module (K40/6) at retaining tabs (3) and swivel out of instrument panel (4) in the direction of the arrow
4	Unlock exterior lights switch (S1) at retaining clamps (5) and pull out far enough to gain access to electrical connection (6)	Unlock exterior lights switch (S1) from the rear through the opening in the instrument panel (4).
5	Detach electrical connection (6) and remove exterior lights switch (S1)
6	Install in the reverse order