Remove/install interior compartment prefuse box - AR54.15-P-1350LW

Model 205 

Model 253 

Fig 1: Identifying Interior Compartment Pre-Fuse Box Remove/Install Components - Shown On Model 205

Courtesy of MERCEDES-BENZ USA

Shown on model 205 

	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Remove floor covering in front passenger footwell		AR68.20-P-2070LW
2	Detach ground line of on-board electrical system battery		AR54.10-P-0003LW
3	Open covers (2)
4	Remove positive lines (3) at the vehicle interior prefuse box (F32/4)	The number of positive lines (3) varies depending on the vehicle equipment. The connections of the positive lines (3) are shape-keyed.
		Nut, positive line to vehicle interior prefuse box	*BA54.15-P-1004-01K
5	Disconnect electrical connection (4)
6	Disconnect electrical wiring harness (5) at the vehicle interior prefuse box (F32/4) and place to one side
7	Unscrew nut (6)
8	Remove vehicle interior prefuse box (F32/4)
9	Install in the reverse order

FUSE AND RELAY BOX

Number	Designation			Model 205	Model 253
BA54.15-P-1004-01K	Nut, positive line to vehicle interior prefuse box	M6	Nm	8	8
		M8	Nm	16	16