Remove/install cigarette lighter - AR54.10-P-0030LW

Model 205, 253 with code 301 (Package SMOKER) 

Fig 1: Identifying Cigarette Lighter Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Switch off ignition and remove transmitter key
2	Open flap (7)
3	Remove insert (1) from housing (3)
4	Use pliers (2) to release housing (3) and pull far enough out of spring pin (4) until the electrical connection (5) is accessible	The studs of the pliers (2) must engage in the cutouts of the housing (3) (arrows A).
		Pliers	Fig 2
5	Detach electrical connection (5) and remove housing (3)
6	Unclip spring pin (4) from stowage compartment with ashtray (6) by pushing back the two catch hooks, and then remove it	Check for correct installation position of spring pin (4).
7	Install in the reverse order

Fig 2: Identifying Pliers (169 589 00 37 00)

Courtesy of MERCEDES-BENZ USA