Remove/install 12 Volt socket - AR54.10-P-1000LW

Model 205, 253 

Fig 1: Identifying 12 Volt Socket Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Switch off ignition and remove transmitter key
2	Open flap (1)
3	Open flap (2) on vehicle interior socket (X58/1)
4	Release vehicle interior socket (X58/1) using pliers (3) and pull out until the electrical connector (4) is accessible	The jaws of the pliers (3) must engage in the recesses of the vehicle interior socket's (X58/1) housing (arrows A). Align flap (2).
		Pliers	Figure
5	Detach electrical connection (4) and remove vehicle interior socket (X58/1)
6	Install in the reverse order

Fig 2: Identifying Pliers (169 589 00 37 00)

Courtesy of MERCEDES-BENZ USA