LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2015 >> C300 Base >> Repair and Diagnosis >> Electrical >> Body Electrical >> Electrical System, Equipment & Instruments - 205 Chassis (4D Sedan) - 1 Of 4 >> Basic Knowledge >> Instrument cluster (IC), operating information - GF54.30-P-0002-05RF

Instrument cluster (IC), operating information - GF54.30-P-0002-05RF

MODEL 205, 253 

Operating instructions 

The left multifunction steering wheel button group (S110) and the right multifunction steering wheel button group (S111) can be used to display various menu levels in the multifunction display (A1p13) of the instrument cluster (A1):

IMPORTANT All the buttons of the multifunction steering wheel button group are always installed. However the available functions depend on the equipment of the vehicle.

Overview of available menus (equipment-dependent):

"Trip" menu 

The following functions can be selected in the "Trip" menu:

"Navi" menu (with CODE 531 (COMAND APS) or CODE 357 (Map navigation)) 

Navigation notes are displayed in the "Navi" menu when the function is switched on. If the function is deactivated, the direction of travel is shown along with cardinal points, e.g. "NW direction of travel".

"Radio" menu 

Radio stations can be selected in the "Radio" menu.

"Media" menu 

The following functions can be selected in the "Media" menu:

"Telephone" menu 

When the function is switched on the name of the selected mobile telephone network is displayed in the "Telephone" menu. It is still possible then to scroll through the stored telephone book and select an entry. When the function is switched off the text "Telephone Off" is displayed.

IMPORTANT If a telephone is not detected when the function is switched on, the message "Ready for Bluetooth telephony" appears.

"Assist graphic" menu 

Depending on the equipment installed and activation, the following status indications are shown in the "Assist graphic" menu:

IMPORTANT Operating the left multifunction display button group takes you to the "Attention level" status indication. The "level of tiredness" is shown there.

"Service" menu 

The following functions can be selected in the "Service" menu:

"Settings" menu 

Different functions can be switched on and off in the "Settings" menu. The following main menus can be selected:

"Head-up display" menu (with CODE 463 (Head-up display)) 

The "Head-up display" menu can be used to switch the display of individual information on the windshield on or off.

"AMG" menu (model 205.086/087/286/287) 

Various system information is displayed in the "AMG" menu.

The following submenus can be called up:

Submenus are shown in two display menus. The following information is shown in the upper static display level:

IMPORTANT An active "UP" upshift indicator is shown in red. If the "AMG" submenu is not activated, an active upshift indicator overlays all information displayed.

Warm-up submenu 

The following information is displayed in the Warm-up menu:

SETUP submenu 

The following information is displayed in the SETUP submenu: