Remove/install multimedia connection unit in front stowage compartment - AR82.60-P-1032LW
Model 205, 253
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove | |||
| 1 | Release center console cover (1) and lift at rear until electrical connector (2) is accessible | Model 205 with transmission 716 Model 253 with transmission 716 |
AR68.20-P-2350LWA |
| Model 205 with transmission 722, 724, 725 Model 253 with transmission 724, 725 |
AR68.20-P-2350LW | ||
| 2 | Disconnect electrical connector (2) | ||
| 3 | Insert removal fixtures (3) in multimedia connection unit (A90/5) or USB electrical connectors (X115) and remove multimedia connection unit (A90/5) or USB electrical connectors (X115) from center console | Fig 2 | |
| 4 | Operate locks (arrows) on multimedia connection unit (A90/5) or USB electrical connectors (X115) and pull out removal fixtures (3) | ||
| Install | |||
| 5 | Insert multimedia connection unit (A90/5) or USB electrical connectors (X115) in center console | ||
| 6 | Connect electrical connection (2) | ||
| 7 | Fasten center console cover (1) | Model 205 with transmission 722, 724, 725 Model 253 with transmission 724, 725 |
AR68.20-P-2350LW |
| Model 205 with transmission 716 Model 253 with transmission 716 |
AR68.20-P-2350LWA |